590723
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
Installation
The HCD92534 camera is designed for installation on a wall or ceiling. The
HCD92534 is weather sealed for indoor or outdoor locations.
Attaching the Camera
1. Position the camera to the desired mounting location on a wall or ceiling. Be
sure the location is solid on a flat, smooth surface (for example, a
crossbeam).
2. Using the supplied mounting template, mark the four screw holes for
installation.
3. Use four screws appropriate to your installation, screw the camera to the
marked holes.
The mounting bracket can be separated from the camera housing for easier
installation. This is done by unscrewing and removing the thumb screw on the
bracket. Replace and tighten the thumb screw after installation is complete.
Note To ensure a waterproof installation, the notch in the camera base that
the power and video connections exit through should be facing down. If
the power and video connections exit the top of the base (wall mounted
only), water may pool in the camera base. Apply appropriate sealant
around the notches and any other gaps between the camera base and
the mounting surface.
Positioning the Camera
Caution Do not swivel and position the camera without the mounting bracket
firmly in place.
Loosen the thumb screws and move the camera into position. Swivel the camera
to capture the desired field of view. Tighten the thumb screws to set the position.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCD92534X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCD92534X in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info