613722
26
Zoom out
Zoom in
Previous page
1/32
Next page
Rev 1.01 18 900.0355
01/06
Troubleshooting
If this happens … Try this …
No power / LED not
lit
Check the power connections.
Verify that the power supply is
working. (Use a camera that is
known to be good.)
No video Check power connections.
Check BNC connections. (Use a
camera that is known to be
good.)
Check the lens. Remove the
lens. If video is present, the lens
is the source of problem.
Power applied but
picture is black
DC Iris. Check that the Auto Iris
lens selector switch is set to DC.
Increase DC level.
Check wiring connections.
Manual Iris. Check that iris is not
closed.
Video iris Verify that Auto Iris lens selector
switch is set to AI. Increase level
on lens.
Check wiring conditions.
Try lens on another camera or
known good lens on camera.
Dark picture Check lens iris.
Check coax termination is 75 Ω.
Picture noise /
grainy during
daylight operation
Verify lens iris level with AGC
function disabled.
Picture too bright Manual Iris. Switch AES ON.
DC Iris. Switch AI ON, adjust
ALC.
Video Iris. Switch AI ON, reduce
level on lens.
Picture not sharp
(out of focus)
Adjust focus on lens.
Adjust back focus.
Picture goes soft
(out of focus) in low
light
Adjust focus under low light
conditions or use a neutral density
filter under normal lighting
conditions.
Camera roll When operating 12 VDC, set Line
Lock (LL) switch to INT (Internal).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCD485EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCD485EX in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info