613722
15
Zoom out
Zoom in
Previous page
1/32
Next page
Rev 1.01 7 900.0355
01/06
Mounting the Lens
1. Mount the lens by turning it clockwise on the lens mount
of the camera.
2. Connect the lens cable to the auto iris lens connector on
the rear panel of the camera.
Caution The lens mount used should be a CS-Mount
(1”-32UN) and the lens weight should be less
than 450 g (0.99 lbs).
Focus and Back Focal Adjustment
The following adjustment should only be done by qualified
service personnel or system installers.
1. Loosen the back focus adjustment screw on the topside
of the front head.
Figure 7 Back Focal Adjustment
2. Move the back focus adjustment screw to the desired
position.
3. Tighten the back focus adjustment screw to lock it into
place.
Caution Do not tighten the back focal adjustment screw
too much, otherwise the back focus
mechanized unit might be damaged. Gently
finger tighten only. When using the C-mount
lens, do not rotate the ring counter-clockwise
by force. If the ring is rotated by force, the inner
lens or CCD image sensor may be damaged.
Back focal adjustment screw
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCD485EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCD485EX in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info