Manual Honeywell HCD484L (page 14 of 144) (English, German, Dutch, French, Italian, Spanish)

590741

Zoom out

Zoom in

1/144

Rev 2 9 G-113079-002

02/07

OSD Menu Functions

Use the OSD menu controls to program the camera.

1. Press and hold the MENU (center) button for 2

seconds to display the Setup menu.

2. Press the UP or DOWN buttons to select a menu item.

3. Press the MENU button to enter the selected

submenu.

4. Press the + or – buttons to increase/decrease the

value of the selected item.

Figure 9 OSD Menu Controls

Saving your Settings

First Method: When you are satisfied with your settings:

1. Press MENU for two seconds. The SETUP MENU is

replaced by one of two messages:

SAVE? displays when values have been changed.

Selecting SAVE exits Setup mode and saves your

changes.

QUIT? displays when you have not changed any

settings. Selecting QUIT exits Setup mode without

saving any changed values.

2. Press + or – to select SAVE or QUIT and then press

MENU to exit the Setup mode. Press UP or DOWN to

cancel the SAVE/QUIT and return to the SETUP

MENU.

Second Method: Select EXIT MENU on the SETUP MENU,

press MENU, and then select SAVE AND EXIT to save the

changed settings and exit the menu. Select EXIT to exit

without saving the settings.

DOWN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCD484L in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HCD484L Manual

Product: