613723
23
Zoom out
Zoom in
Previous page
1/32
Next page
Rev 1.01 15 900.0355
01/06
3. Press SET to start the white balance tracing.
4. When the white balance tracing is completed, release the
SET key and remove the white surface from in front of the
camera.
D/N
This function allows the camera to automatically switch from a
color camera to B/W camera by either auto detecting the
luminance, manual switching, or by the external contact
terminal’s IR Lamp connection on the camera rear panel.
Fuzzy
The camera switches to a B/W camera by auto detecting
luminance.
C/K Auto: removes burst signal when the camera changes to
B/W. OFF: keeps the burst signal when the camera changes to
B/W mode.
D/N Level selects the detection level at either High or Low.
Time sets the time (from 5 to 60 seconds) before the camera
switches to B/W after detecting a low light condition.
AGC Boost ON: switches night mode to AGC Max Gain. OFF:
switches night mode to AGC Day Gain.
IR Pass
The camera switches to B/W immediately upon selecting this
function.
Burst On keeps the Burst signal when the camera switches
to the B/W mode.
Burst Off removes the Burst signal when the camera
switches to the B/W mode.
IR Cut
Disables the Day/Night function and keeps the camera in color
mode only. In this mode the camera will not accept any IR
luminance.
RS485
Before operating this function, make sure the correct RS485
connection is made on the rear panel.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCD484EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCD484EX in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info