554932
141
Zoom out
Zoom in
Previous page
1/252
Next page
Galaxy Flex - Installatiehandleiding Communicatie [56]
141
ISDN-type [56.3.03]
Er zijn twee typen ISDN-lijnen beschikbaar in het EURO ISDN-netwerk; Point to
Multipoint en Point to Point.
Gebruik deze optie om het type te selecteren.
1=Point to Multipoint (standaard)
Gebruik deze configuratie wanneer meer dan één ISDN-systeem is aangesloten op de
ISDN-lijn. Er moet een specifiek MSN-nummer (Multiple Subscriber Number) worden
ingevoerd, zodat de IMOD kan reageren op inkomende oproepen van de bediening op
afstand. Het MSN-nummer kan worden opgevraagd bij de telecomprovider.
Vanaf Imod v3r8 en hoger kan het aantal belsignalen voordat de IMOD opneemt worden
ingesteld met een modifier. Voer het MSN nummer in gevolgd door een # en dan het aantal
belsignalen (0-12). Als de modifier niet wordt gebruikt wordt standaard na 2 belsignalen
opgenomen. Indien #0 wordt ingevuld zal direct worden opgenomen
Opmerking: Alle apparaten waarvoor geen MSN-nummer is geprogrammeerd, reageren
ook op inkomende oproepen.
2=Point to Point
Er is slechts één apparaat toegestaan op de ISDN-bus. In deze configuratie moet er een
TEI-nummer worden geprogrammeerd. De standaardinstelling is 0. Aangezien er slechts één
apparaat is toegestaan, reageert de IMOD anders wanneer deze is geprogrammeerd voor
Point to Point.
Het hardwarematige ISDN-onderbrekingsrelais wordt altijd geactiveerd voordat de module
een kiesreeks start. Nadat alle alarmsignalen zijn verzonden, wordt het relais gedeactiveerd
en wordt de PABX van de klant, indien deze was aangesloten, opnieuw op het
ISDN-netwerk aangesloten. Tijdens de kiesreeks is het niet mogelijk de PABX te gebruiken
voor uitgaande oproepen.
Bij een inkomende oproep voor de module wordt het relais direct geactiveerd, waarbij de
PABX voor de ISDN-lijn wordt uitgeschakeld, waarna de IMOD de lijn oppakt. Sluit altijd
de PABX aan op de ISDN-uitpoorten om een correct functioneren te garanderen van de
PABX en de IMOD.
De telefoonnummers die beschikbaar zijn op een Point-to-Point-lijn wijken vaak alleen maar
in de laatste twee cijfers van elkaar af, bijvoorbeeld 123401 ~ 123409. Voor de verwerking
van inkomende oproepen via de remote servicing, moet één telefoonnummer worden
geprogrammeerd in de IMOD. Dit specifieke telefoonnummer kan niet door de PABX
worden gebruikt omdat de ISDN-module de inkomende oproep direct oppakt. Programmeer
dit telefoonnummer bij het MSN-nummer. Selecteer hiervoor eerst tijdelijk Point to
Multipoint.
Opmerking: X.25 in combinatie met een Point-to-Point ISDN-lijn is niet mogelijk.
ISDN Snatch [56.3.04]
Voor een maximale veiligheid moet de IMOD onder alle omstandigheden een oproep
kunnen doen. De IMOD beschikt over zowel hardware- als softwarematige mogelijkheden
voor het oppakken van een lijn.
141


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy Flex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy Flex in the language / languages: Dutch as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Galaxy Flex

Honeywell Galaxy Flex Quick start guide - Dutch - 4 pages

Honeywell Galaxy Flex User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info