554939
41
Zoom out
Zoom in
Previous page
1/179
Next page
GalaXy 8, 18, 60, 500 en 512
Installateurshandleiding
Bekabelingsvoorschriften
- Pagina 41 -
23-6-99 8:21 rev. 4
6.5 De zones
De default functie-instelling van de zone-ingangen
van de GalaXy alarmmeldcentrales zijn
weergegeven in Tabel 0-3.
GalaXy
Panel
Zone
1001
Zone
1001
Zone
1011
Zone
1012
Overige
zones
GalaXy
8
- - Laatste Volgzone
Inbraak
GalaXy
18/60
Laatste
Volgzone
Inbraak
Inbraak Inbraak
GalaXy
500
- - - - Inbraak
GalaXy
512
Inbraak
Inbraak Inbraak
Inbraak Inbraak
Tabel 0-3: Default functie instelling zone-ingangen
6.5.1 Het zone adres
Iedere zone-ingang heeft een vier digits tellend
adres. Dit adres is opgebouwd uit drie
componenten.
1 Het eerste digit staat voor de
communicatielijn waarop de RIO, waar de
zone-ingang deel van uitmaakt, is
aangesloten.
2 De volgende twee digits geven het RIO
adres aan, waar de zone-ingang deel van
uitmaakt.
GalaXy 8 01 (alleen on-board RIO)
GalaXy 18 00 en 01 (on-board RIO)
en 02
GalaXy 60 00 en 01 (on-board RIO)
en 02 t/m 07
GalaXy 500 01 t/m 15 (lijn 1) en 00 t/m
15 (lijn 2 t/m 4)
GalaXy 512 00 t/m 15 (lijn 1 t/m 4)
3 Het laatste digit geeft het eigenlijke
zonenummer op de RIO aan.
GalaXy 8 RIO 00 zone 1 t/m 8
GalaXy 18 RIO 00 zone 1 en 2, RIO
01 zone 1 t/m 8
GalaXy 60 RIO 00 zone 1 t/m 4, RIO
01 t/m 07 zone 1 t/m 8
GalaXy 500 RIO 01 t/m 15 (lijn 1) en
RIO 00 t/m 15 (lijn 2 t/m
4) zone 1 t/m 8
GalaXy 512 RIO 00 t/m 15 (lijn 1 t/m
4) zone 1 t/m 8
Bijvoorbeeld: 3057
6.5.2 Zone-ingangen aansluiten
Door het opnemen van een weerstanden netwerk
in iedere zonelus kunnen verschillende zone-
statussen onderscheiden worden over twee
kabeladers.
De gemeten weerstandswaarden van de zonelus
en de bijbehorende zone-statussen zijn
weergegeven in Tabel 0-4.
Zone weerstand ()
Status
0 - 800 Sabotage - kortgesloten lus
800 - 900 Lage weerstand
900 - 1200 Zone gesloten
1200 - 1300 Hoge weerstand
1300 - 12000 Zone geopend
12000 -
Sabotage - onderbroken lus
Tabel 0-4: Zone statussen
NOOT: De responsetijd van een zone is de
periode dat een zone in een bepaalde
conditie moet staan voordat de GalaXy
alarmmeldcentrale de conditie
registreert. De responsetijd is ingesteld
op 300 ms. Zie menuoptie 51.27
Parameters.Responsetijd voor
aanvullende informatie.
De standaard aansluiting van een zone is
weergegeven in figuur blz. 40.
Tot maximaal tien detectoren kunnen in één
zonelus worden opgenomen. De aansluiting voor
meerdere detectoren op een zonelus is
weergegeven in figuur blz. 40.
6.5.3 Kabeltype
Het toegepaste kabeltype moet een aderdiameter
hebben van minimaal 0,2 mm. De kabel hoeft
geen getwiste aderparen te hebben. De
afscherming van de kabel moet op correcte wijze
worden geaard (zie 0 6.8 Aarding).
NOOT: De maximale afstand tussen de zone-
ingang en de detector mag niet meer
bedragen dan 500m (bij 0.2mm
aderdiameter).
Zone 7
RIO 05
Communicatielijn 3
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy 8 in the language / languages: Dutch as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info