554943
160
Zoom out
Zoom in
Previous page
1/179
Next page
GalaXy 8, 18, 60, 500 en 512
Installateurshandleiding
Menuoptie 64: Assemble Zone
- Pagina 160 -
1=Uitgangen
Iedere uitgangsfunctie kan worden toegekend aan
de custom zonefunctie.
Bij iedere uitgangsfunctie wordt opgegeven in
welke systeemstatus de custom zonefunctie de
uitgangsfunctie activeert.
Niet actief De uitgangsfunctie wordt niet
geactiveerd door de custom
zonefunctie.
Nachtstand De uitgangsfunctie wordt alleen in
de nachtstand geactiveerd door
de custom zonefunctie.
Dagstand De uitgangsfunctie wordt alleen in
de dagstand geactiveerd door de
custom zonefunctie.
Altijd/24 uur De uitgangsfunctie wordt zowel in
de dagstand als de nachtstand
geactiveerd door de custom
zonefunctie.
Als attribuut Uitgangen wordt geselecteerd, dan
verschijnt de eerste uitgangsfunctie op het LC-
display. Met de [A]-toets en [B]-toets kan door de
uitgangsfuncties gestapt worden. Met de [#]-toets
wordt door de systeemstatussen gestapt.
Aan de custom zonefunctie kunnen meerdere
uitgangsfuncties worden toegekend. Afhankelijk
van de ingestelde systeemstatus activeert de
custom zonefunctie alle toegekende
uitgangsfuncties.
8.40.2 2=Status
Het statusattribuut bepaalt wanneer de custom
zonefunctie actief is. Per systeemstatus wordt
opgegeven of de custom zonefunctie actief is.
Een activatie van de custom zonefunctie
genereert bij attribuut:
Dagstand een alarm als het systeem in de
dagstand staat.
In/Uitgangstijd een alarm tijdens de in- of
uitschakelprocedure.
Deelbeveiligd een alarm als het systeem
deelbeveiligd is ingeschakeld.
Nachtstand een alarm als het systeem
volledig is ingeschakeld.
Van de fabriek uit staat het attribuut voor iedere
systeemstatus op “Niet Actief”.
Met de [A]-toets en de [B]-toets kan door de
systeemstatussen gestapt worden. Met de [#]-
toets wordt het attribuut voor de betreffende
systeemstatus in- en uitgeschakeld.
Druk op de [esc]-toets om de programmering op
te slaan en het submenu te verlaten.
De custom zonefunctie kan gelijktijdig actief zijn in
alle vier de systeemstatussen.
Het resetniveau van het alarm is bepaald in
menuoptie 51.6 Parameters.Alarmreset.
8.40.3 3=Inschakelen
Met het attribuut Inschakelen wordt de invloed van
de custom zonefunctie op de in- en
uitschakelprocedure bepaald.
Start Inschakelen de activatie van custom
zonefunctie start de
inschakelprocedure.
Start Ingangstijd de activatie van custom
zonefunctie start de
uitschakelprocedure.
Schakelt in de activatie van custom
zonefunctie beëindigd de
uitgangstijd en schakelt
het systeem direct in.
Van de fabriek uit staat het attribuut voor ieder
procedureonderdeel op “Niet Actief”.
Met de [A]-toets en de [B]-toets kan door de
procedureonderdelen gestapt worden. Met de [#]-
toets wordt het attribuut voor de betreffende
procedureonderdeel in- en uitgeschakeld.
Druk op de [esc]-toets om de programmering op
te slaan en het submenu te verlaten.
Alle drie de procedureonderdelen kunnen voor de
custom zonefunctie gelijktijdig op actief worden
ingesteld. Het is echter niet raadzaam op
procedureonderdeel Start Inschakelen en
Schakelt In beide actief te maken.
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy 512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy 512 in the language / languages: Dutch as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info