554935
107
Zoom out
Zoom in
Previous page
1/122
Next page
99
Galaxy 2 Series Installation Manual
SECTION 8: RF HINTS AND TIPS
How to Install RF
The system works with the current 5800 receivers on ECP and/or the RF Portal on RS485. A maximum of
two RF receivers can be fitted to the system (two on the ECP bus, two on the RS485 bus or one on each
bus), to support up to 44 zones. The two RF receivers are in addition to the prox keypads. All programming
is local in the panel. Up to 23 RF fobs and 23 prox tags/cards can be added to the system.
RF Zones
To ease installation, there is a built-in signal strength reading for each Alpha or V2 protocol detector. This is
viewable from the keypad, in walk test (option 31), in display zones (option 21) and from program zones
(option 52).
All RF device handling is done in the Control panel. No device processing takes place at the receiver. This
allow all transmitting devices to signal to the alarm panel via the nearest available receiver (Roaming) as per
the 5882 system, but including Rolling Code fobs.
RF Stop Set
There is a facility to prevent setting if any of the supervised peripherals have not sent a supervision signal within
the previous 20 minutes. An indication will only be given if RF Check is enabled (see menu
51.50.6= Parameters.RF Options.RF Check) The devices involved are indicated to the user at the time of
starting the setting procedure. This condition is not a fault. The 2HR supervision fail is a fault. This stop-set is
merely a warning to the user that the system cannot determine the status of the detector.
NOTE: This function only checks zones with RF supervision enabled (see menu 52.5.3=Zones.RF
Options.Supervision)
RF Diagnostics
Facilities are provided to allow the panel to record and pass the following information to the remote servicing
software for remote diagnostics.
1. Minimum signal strength for each detector from each receiver.
2. Current signal strength for each detector from each receiver.
3. Maximum background noise for each receiver.
4. Current background noise for each receiver.
5. Transmitter battery status.
NOTE: Point 5 is only applicable to 5800 series receivers.
RF Hints & Tips
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy 2 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy 2 Series in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Galaxy 2 Series

Honeywell Galaxy 2 Series User Manual - Dutch - 20 pages

Honeywell Galaxy 2 Series Usermanual and installation guide - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info