Manual Honeywell FH-972E (page 5 of 62) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460224

Zoom out

Zoom in

1/62

ENGLISH

2. When you do not wish use the fan heater,

you must pull the power cable (12) out

completely.

OPERATING INSTRUCTIONS

FH-971E Fan Heater with rotary power switch

FH-972E Fan Heater with rotary thermostat switch

FH-973E Fan Heater with power - / thermostat

rotary switch

1. Make sure that the rotary power switch (3)

is in the OFF position (4). Connect the

power plug to the power socket.

Do not

touch the power cable with wet hands.

2. Make sure that the air intake vent (11)

and air exhaust vent (2) are not cov-

ered.

The air intake vent (11) and air

exhaust vent (2) must always be free

when the fan heater is operating.

3. Use the rotary power switch (8) and/or the

rotary thermostat switch (8) for the heating

operation, depending on the fan heater

model and as described below.

4. Before you move or store the fan heater,

turn the rotary power switch (3) to the OFF

position (4) and unplug the appliance.

Rotary power switch

By turning the rotary power switch (3) in a

clockwise direction

you can choose

between 4 possible settings:

(O) OFF (4)

( ) Cold air (5)

( ) Warm air 1000 Watt (6)

( ) Hot air 2000 Watt (7)

2. When the rotary power switch (3) is in the

hot air 2000 W position (7), you cannot

turn it further in a clockwise direction, but

have to turn it back in an anticlockwise

direction.

Rotary thermostat switch

For model FH-973E, ﬁrst turn the rotary

power switch (3) to a heating setting. For

model FH-972E follow the instructions

starting at 2.

2. Turn the rotary power switch (8) clockwise

to the highest position 7.

3. When the desired room temperature is

reached, turn the rotary thermostat switch

(8)

anticlockwise until you hear it click.

Now the fan heater turns the heating

operation off.

4. Now turn the rotary thermostat switch back

(8) clockwise very slightly. The fan heater

will now automatically switch on and off to

maintain the chosen room temperature.

5. The further you turn the rotary thermostat

switch (8) in a clockwise direction, the

higher the room temperature will be. The

highest position 7 corresponds to a room

temperature of about 30°C. The lowest

position ( ) corresponds to a room temper-

ature of about 5 °C.

6. It is normal for the thermostat not to switch

itself on when the room temperature is

more than 30 °C.

7. If the room temperature is less than 5 °C,

the fan heater will heat until the room

temperature has risen to above 5 °C.

8. When the rotary power switch (3) is in the

hot air 2000 W position (7), you cannot

turn it further in a clockwise direction, but

have to turn it in an anticlockwise direction.

Overheating protection

The fan heater is equipped with overheat-

ing protection, which automatically switches

the appliance off if it is overheated.

2. In this case, turn the rotary power switch

(3) to the OFF position (4) and unplug the

appliance.

3. Allow the fan heater to cool for at least 20

minutes.

4. If necessary, remove any objects which

have caused faulty operating or overheat-

ing from inside or in front of the air intake

vent (11) or air exhaust vent (2).

5. Restart the fan heater as described in the

„operating instructions“.

CLEANING AND MAINTENANCE

We advise you to clean the fan heater regularly.

So as not to impair the working of the fan heater,

please follow the instructions for cleaning and

maintenance.

❄

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell FH-972E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell FH-972E Manual

Product: