565018
24
Zoom out
Zoom in
Previous page
1/52
Next page
22 Step 3: Power up and bind devices
Power up and bind a Radiator Controller
(HR80)
If you want to control the zone temperature with your evohome
Controller (the evohome Controller needs to be located in that
zone) press YES, otherwise press NO and bind the sensor.
On the HR80, you need to bind the
sensor and actuator separately
1
Power up the Radiator Controller (see HR80 instructions)
To bind the sensor
2
Turn release clips on each side of the Radiator
Controller to remove the bottom plate
3
On the underside of the Radiator Controller
press the recessed bind button
4
The Radiator Controller screen should briefly show
a flashing RF icon then SYNC when successful.
The evohome Controller will also show if binding
was successful (if not go back and re-bind)
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
“Settings”
for 3
seconds
2. Press the green tick
3. Press ADD ZONE
4. Type a name for the
new zone and press
the green tick
5. Press RADIATOR
VALVE
evohome
Controller
Radiator Controller (HR80)
2
3
SIDE VIEW BOTTOM VIEW
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell evohome at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell evohome in the language / languages: English as an attachment in your email.

The manual is 8,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell evohome

Honeywell evohome User Manual - English - 20 pages

Honeywell evohome User Manual - English - 52 pages

Honeywell evohome Installation Guide - German - 34 pages

Honeywell evohome User Manual - German - 20 pages

Honeywell evohome User Manual - Dutch - 85 pages

Honeywell evohome User Manual - Dutch - 20 pages

Honeywell evohome Installation Guide - Dutch - 44 pages

Honeywell evohome Installation Guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info