565018
8
Zoom out
Zoom in
Previous page
1/52
Next page
6 Step 1: Wire up the heating system
Wireless Cylinder Thermostat (CS92) continued
To fit the CS92 Insertion Sensor
1
Fit in the cylinder immersion well with suitable fittings to
provide strain relief and prevent accidental removal
2
If the sensor doesn’t fit tightly in the immersion
well fill the space with heat-conductive compound
to ensure maximum heat transfer
3
Install the CS92 Transceiver in a suitable location
close enough for the cable from the sensor to reach
4
Connect the cable from the sensor to the CS92 Transceiver.
The wires are polarity free, so can be connected
in any order. Provide appropriate strain relief
to this end of the sensor cable as well.
If this sensor is used in
an unvented hot water
storage application, the
cylinder manufacturer’s
instructions must be
followed to ensure
compliance with all
safety regulations.
If in doubt, contact the
cylinder manufacturer.
!
4
Wire to CS92 Transceiver
A x B Cy
A x B Cy
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell evohome at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell evohome in the language / languages: English as an attachment in your email.

The manual is 8,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell evohome

Honeywell evohome User Manual - English - 20 pages

Honeywell evohome User Manual - English - 52 pages

Honeywell evohome Installation Guide - German - 34 pages

Honeywell evohome User Manual - German - 20 pages

Honeywell evohome User Manual - Dutch - 85 pages

Honeywell evohome User Manual - Dutch - 20 pages

Honeywell evohome Installation Guide - Dutch - 44 pages

Honeywell evohome Installation Guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info