565018
41
Zoom out
Zoom in
Previous page
1/52
Next page
Adding and replacing components in an
existing system
1
On the Central Controller press and
hold “Settings” for 3 seconds
2
Press the green tick
3
To change a device in a zone press ZONE SETTINGS
and select the zone name To add or change an actuator
4
Press the application button then next and follow
the instructions to bind a new actuator
5
To change the sensor press the sensor button, select
the type of sensor or next and follow the instructions
to bind a sensor. If the old product is not required
in the system remember to remove the batteries at
it may still try to communicate with the system.
To change a boiler relay, system valve, hot
water component or remote gateway
1
Press SYSTEM DEVICE
2
Select the type of device and follow the instructions
to bind. If the old product is not required in the
system remember to remove the power at it may
still try to communicate with the system.
Adding and replacing components in an existing system
P39 evohome Installation Guide
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell evohome at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell evohome in the language / languages: English as an attachment in your email.

The manual is 15,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell evohome

Honeywell evohome Installation Guide - English - 52 pages

Honeywell evohome User Manual - English - 20 pages

Honeywell evohome Installation Guide - German - 34 pages

Honeywell evohome User Manual - German - 20 pages

Honeywell evohome User Manual - Dutch - 85 pages

Honeywell evohome User Manual - Dutch - 20 pages

Honeywell evohome Installation Guide - Dutch - 44 pages

Honeywell evohome Installation Guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info