565018
32
Zoom out
Zoom in
Previous page
1/52
Next page
To check the RF signal strength between the wireless devices
and the Central Controller go to RF COMMS CHECK in the
Central Controller Installer Menu and test each wireless device.
1
On the Central Controller press and
hold ‘Settings’ for 3 seconds
2
Press the green tick
3
Press RF COMMS CHECK
4
Choose the devices you want to test
Mains Powered Wireless Devices
Mains powered devices do not need to be put into
test mode and will automatically respond to the
test message sent from the Central Controller:
Wireless Relay Box (BDR91)
• The Relay Box will flash the green LED from 1 flash (poor)
to 5 flashes (excellent) – no flashing means the Relay Box
has not received a test signal from the Central Controller
Remote Access Gateway (RFG100)
• The Gateway will flash the green LED from 1 flash (poor)
to 5 flashes (excellent) – no flashing means the Gateway
has not received a test signal from the Central Controller
Underfloor Heating Controller (HCE80/HCC80)
• The Underfloor Heating Controller will flash the
green LED for the zone you are testing from 1
flash (poor) to 5 flashes (excellent) – no flashing
means the Underfloor Heating Controller has not
received a test signal from the Central Controller
To save power the battery
devices only communicate
with the Central Controller
every four minutes therefore
the system may not
respond immediately to a
manual change.
!
Advanced RF communication check
P30 Step 4: System test
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell evohome at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell evohome in the language / languages: English as an attachment in your email.

The manual is 15,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell evohome

Honeywell evohome Installation Guide - English - 52 pages

Honeywell evohome User Manual - English - 20 pages

Honeywell evohome Installation Guide - German - 34 pages

Honeywell evohome User Manual - German - 20 pages

Honeywell evohome User Manual - Dutch - 85 pages

Honeywell evohome User Manual - Dutch - 20 pages

Honeywell evohome Installation Guide - Dutch - 44 pages

Honeywell evohome Installation Guide - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info