680984
33
Zoom out
Zoom in
Previous page
1/53
Next page
To check the RF signal strength between the
wireless devices and the evohome Controller go
to RF COMMS CHECK in the evohome Controller
Installer Menu and test each wireless device.
1
On the evohome Controller press and
hold ‘Settings’ for 3 seconds
2
Press the green tick
3
Press RF COMMS CHECK
4
Choose the devices you want to test
Mains Powered Wireless Devices
Mains powered devices do not need to be put into
test mode and will automatically respond to the test
message sent from the evohome Controller:
Wireless Relay Box (BDR91)
• The Relay Box will flash the green LED from 1 flash (poor) to
5 flashes (excellent) – no flashing means the Relay Box has
not received a test signal from the evohome Controller
Remote Access Gateway (RFG100)
• The evohome Controller will display the signal
strength (poor to excellent). The Remote Access
Gateway will not indicate the signal strength.
Underfloor Heating Controller (HCE80/HCC80)
• The Underfloor Heating Controller will flash the
green LED for the zone you are testing from 1 flash
(poor) to 5 flashes (excellent) – no flashing means
the Underfloor Heating Controller has not received
a test signal from the evohome Controller
To save power the
battery devices only
communicate with the
evohome Controller
every four minutes
therefore the system
may not respond
immediately to a manual
change.
!
Advanced RF communication check
30 Step 4: System test
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Evohome ATF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Evohome ATF200 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Evohome ATF200

Honeywell Evohome ATF200 Installation Guide - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info