680984
17
Zoom out
Zoom in
Previous page
1/53
Next page
Power up and bind Radiator Controllers
(HR92) – Your evo Zone Kit
Bind the Radiator Controllers (HR92)
1
Remove the circular top cover
2
Open the battery clip and insert the AA batteries supplied
3
Close the clip and replace the cover
4
Press the button once − it should say UNBOUND
5
Press and hold the button for a further
5 seconds until it says BIND
6
Press the button once – it should say BINDING
7
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
8
The name of the allocated zone should appear on
the HR92 display when you press the button
9
Either press the green tick to add another
radiator to the zone. Or press the red cross if
you don’t need to add another radiator to the zone
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
‘Settings’
for 3
seconds
2. Press the green tick
3. Press ADD ZONE
4. Press the zone you
want to add the
Radiator Controller to
5. Rename the zone if
required and/or press
the green tick
6. Press RADIATOR
VALVE
7. If you want to control
the zone temperature
with the evohome
Controller (which
needs to be located in
that zone) press YES,
otherwise press NO.
You must repeat these
steps for each radiator
controller.
evohome
Controller
1 2 4 5 6
PRESS
ONCE
PRESS
5 SEC
PRESS
ONCE
Radiator Controllers (HR92)
14 Step 3: Power up and bind devices
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Evohome ATF200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Evohome ATF200 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Evohome ATF200

Honeywell Evohome ATF200 Installation Guide - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info