32443
6
Zoom out
Zoom in
Previous page
1/20
Next page
69-1676 6
Mount Decorator Cover Plate (Optional) and Wallplate Directly to Wall
If using the decorator cover plate, pull the wires through
the wiring hole on the decorator cover plate. Position the
decorator cover plate against the wall so that the UP
indicator in the middle of the decorator cover plate is
pointing up.
Position the wallplate:
If using the decorator cover plate, pull the wires
through the wiring hole on the wallplate and place
the wallplate over the decorator cover plate. Turn
the wallplate until the wiring holes are aligned and
the two screw holes on the left and right side of the
wallplate line up with the screw holes on the
decorator cover plate. You will be inserting the
screws through these holes into the wall.
If attaching the wallplate directly to the wall, pull the
wires through the wiring hole on the wallplate and
position it so that the UP indicator on the wallplate is
pointing up.
Use a pencil to mark the center of the screw holes on the
left and right sides of the wallplate.
Remove the wallplate and decorator cover plate (if used)
and drill two 3/16 in. holes in the wall (if drywall) at the
locations you marked. For materials such as plaster, drill
7/32 in. holes where marked. Gently tap the provided
anchors into the drilled holes until they are flush with the
wall.
Pull the wires through the wiring holes and reposition the
decorator cover plate (if used) and wallplate over the
screw holes.
Attach the decorator cover plate (if used) and wallplate to
the wall with two 1-in. screws.
Fig. 1. Mount decorator cover plate (optional) and
wallplate directly to wall (heating-cooling wallplate
shown).
M19493
WALL ANCHORS (2)
WIRING HOLES
DECORATOR COVER PLATE
W
ALL PLATE
1 INCH
SCREW (2)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CT8775C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT8775C in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CT8775C

Honeywell CT8775C User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info