Manual Honeywell CT51 (page 4 of 16) (English, French, Spanish)

32421

Zoom out

Zoom in

1/16

CT51 Series

Set fan switch

Fan operation settings:

F: For gas or oil heating systems,

leave the fan operation switch in this

factory-set position (for systems that

control the fan in a call for heat.)

E: Change the switch to this setting for

heat pump

or electric heat

systems.

(This setting is for systems that allow

the thermostat to control the fan in a

call for heat, if a fan wire is connected

to the G terminal.)

Set heat anticipator

Move the adjustment arrow to the

proper setting for your system

(see table below).

Your system Setting

Steam 1.2

Hot water heat 0.8

Warm air (high efficiency) 0.8

Warm air (standard) 0.4

Electric heat 0.3

Thermostat mounting

1 Align the slots on the cover with tabs on

the sides of the base, then push gently

until the cover snaps into place.

2 Restore power at the heating/cooling sys-

tem, or at the fuse/circuit breaker panel.

Tab

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT51 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell CT51 Manual

Product: