32387
15
Zoom out
Zoom in
Previous page
1/20
Next page
25 69-0733—3
26 69-0733-3
STEP 10 Check Thermostat Operation After Programming
And Installing
HEATING
Do
not
check heating system operation
by jumpering thermostat terminals at
the primary control, such as the gas
valve, zone valve, oil burner control.
This will damage the thermostat. In-
stead, you could jumper R and W wires
at the thermostat.
HEAT OFF COOL
Move the system switch to HEAT and
the fan switch to AUTO.
Press up arrow of key until the setting is
about 10°F (6°C) above room tempera-
ture. Heating should start and the fan
should run after a short delay (immedi-
ately if fan operation switch is set in
ELEC position).
FAN
AUTOON
Temp
M2472
Press down arrow of key until setting is
about 10°F (6°C ) below room tempera-
ture. The heating equipment should shut
off.
COOLING
To avoid possible compressor damage,
do not operate the cooling system when
outside temperature is below 50°F
(10°C). See compressor manufacturer
instructions for further information.
NOTE: When cooling setting is changed,
thermostat may delay up to five min-
utes before turning on the air condi-
tioner. This delay protects the com-
pressor.
Move the system switch to COOL and
the fan switch to AUTO.
Press down arrow of key until setting is
about 10°F (6°C) below room tempera-
ture. The cooling equipment and fan
should start.
Press up arrow of key until the setting is
about 10°F (6°C) above room tempera-
ture. The cooling equipment and fan
should stop.
Temp
M2472
HEAT OFF COOL
FAN
AUTOON
Temp
Temp
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CT3455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT3455 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info