32381
10
Zoom out
Zoom in
Previous page
1/80
Next page
7 69-0733B—1
IMPORTANT:
Although the thermostat has a
low battery indicator, replace the batteries
once a year to prevent the thermostat and
heating/cooling system from shutting down
due to lack of battery power.
When leaving home for longer than a month, as
a precaution, change batteries before you leave
to prevent system from shutting down due to lack
of battery power.
Use fresh alkaline batteries; nonalkaline bat-
teries will not last as long. We recommend
Energizer
®
batteries.
Adaptive Intelligent Recovery™
Selection
Before you program your thermostat, you must
decide if you want to leave the thermostat at
the factory-set Adaptive Intelligent Recovery™
setting, or adjust it to conventional recovery. If
you choose conventional recovery, adjust screw
3A (on the back of the thermostat) by turning
OUT one turn.
With Adaptive Intelligent Recovery™, your home
will reach the comfort temperature gradually to
be at the temperature you set at the exact time
programmed into the thermostat. Maximum en-
ergy savings and comfort will be achieved.
More about Adaptive Intelligent
Recovery™…
This thermostat is actually a small but powerful
computer. When calculating the exact time to
turn on your furnace or air conditioner, it consid-
ers: (1) air temperature, (2) the temperature of
the wall and (3) when you want the comfort
temperature established.
8 69-0733B—1
During recovery, the thermostat increases the
control temperature gradually and turns the
equipment on and off several times BEFORE
reaching your comfort time to save energy by
avoiding overshooting the comfort temperature.
You can see the current control temperature
anytime during recovery by pressing the CUR-
RENT SETTING key.
This smart control learns from experience. Each
day it checks how closely it hit the target and
adjusts the recovery start time accordingly. It
normally takes FOUR TO EIGHT DAYS AFTER
INSTALLATION for the thermostat to adjust to
the weather, your lifestyle, home construction
and heating/cooling system.
With conventional recovery, the programmed
time will mark the start of the time your furnace
or air conditioner comes on to start recovery;
therefore, you should program the start time to
be earlier than the desired comfort time. The
best starting time will vary as the seasons
change, but 30 minutes is a good head start
time to use.
NOTE: If you adjust screw 3A for conventional
recovery, a indicator will appear in the lower
right corner of the thermostat display as a
reminder that you are
no longer using the
Adaptive Intelligent
Recovery™ feature.
PM
SET
PT
TUE
DAYTIME
INDICATES
THERMOSTAT IS SET FOR
CONVENTIONAL RECOVERY
M2483
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CT3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT3400 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CT3400

Honeywell CT3400 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info