Manual Honeywell CT30 (page 4 of 16) (English, French)

32355

Zoom out

Zoom in

1/16

Owner’s Manual

Wire connections

1 Match each labeled wire

with same letter on terminal.

2 Use a screwdriver to loosen

screw terminals, wrap bare

wire securely around termi-

nals, then tighten screws.

3 Push any excess wire back

into the wall opening.

Labels don’t match?

If labels do not match letters on

thermostat, see table below.

Mount thermostat base

1 Drill holes at pencil-marked locations (3/16” holes for drywall, 7/32” holes for plaster).

2 Use hammer to

tap anchors into

holes until flush

with wall.

3 [Optional] Pull

wires through

cover plate (if

needed to cover

marks left by your

old thermostat).

4 Connect wires first

(see below), then

insert screws.

Check level if

desired, then

tighten screws.

Thermostat base

Optional cover plate

Back of thermostat base

Existing wires Connect to:

R • RH • 4 • V Terminal “R”

W • W1 • H Terminal “W”

Y • Y1 • M Stop! See note

G • F Stop! See note

Rc Stop! See note

If any of these wires are present, you

cannot use this thermostat with your

system. See page 2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CT30 in the language / languages: English, French as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell CT30 Manual

Product: