613687
24
Zoom out
Zoom in
Previous page
1/26
Next page
24
Symptom Possible Cause Remedy
ST9120C shows the
message ‘SENSOR LOW
BATT’ and a flashing tap
symbol
CS92A batteries
are running low on
power
Change the CS92A batteries (see page
19 for how to do this)
CS92A battery low
indication (press CS92A
button and red light
gives a short flash every
second 0.1s on, 0.9s off.
Note: light will switch off
after approx 1 minute to
save battery power)
ST9120C shows the
message ‘NO SIGNAL
and a flashing tap
symbol
CS92A batteries are
running low on power
Change the CS92A batteries (see page
19 for how to do this)
RF communication
path between
ST9120C and
CS92A is blocked,
possibly by a
metal object
Check direct path between both
products and re-position any objects
that may be blocking the signal
Relocate the CS92A transceiver, if
possible
ST9120C shows the
message ‘SENSOR
FAULT’ and a flashing
tap symbol
CS92A sensor error
indication (Press
CS92A button and red
light blinks 0.5s on,
0.5s off. Note - light will
switch off after approx
1 minute to save
battery power
CS92A sensor
cable may be
disconnected
from the wiring
terminals
Re-connect the sensor wires to the
CS92A terminals
Fault with CS92A Call Installer
Troubleshooting Guide (cont.)
FAQ AND TROUBLESHOOTING
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CS92A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CS92A in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info