Manual Honeywell CM727 (page 2 of 12) (English)

471573

2

Zoom out

Zoom in

Previous page

1/12

Next page

2 CM700 Wireless - Programmable Room Thermostat

1) Installation Information

As these products communicate using RF technology special care must be taken during installation. The

location of the RF components as well as the building structure may inﬂuence performance of the RF

system. To assure system reliability, please review and apply the information given below.

Within a typical residential building the two products should communicate reliably within a 30m range. It

is important to take into consideration that walls and ceilings will reduce the RF signal. The strength of

the RF signal reaching the relay box depends on the number of walls and ceilings separating it from the

room thermostat, as well as the building construction - the diagram below illustrates an example of typical

signal strength reduction. Walls and ceilings reinforced with steel or plasterboard walls lined with metal foil

reduce the RF signal signiﬁcantly more.

Once a position is selected for the room thermostat this can be checked using the RF Communication Test

mode as described in section 2.2.3 Locating the Room Thermostat. If the position is unsuitable the relay

box will not respond and an alternative position must be selected.

Typical example of Building Fabric Signal losses

Wall Wall Wall

Ceiling

Max. Signal Length 30 metres

= Signal Strength

1

My heating is not coming on when I set it to the manual button Submitted on 26-5-2023 at 15:50
Reply Report abuse
- It may be because the room temperature is already at temp. Try turning the temp up and see if it fires. Answered on 27-5-2023 at 08:53
  Vote up Report abuse
When I set my thermostat to manual the heating doesn’t come on, where am I going wrong. Thank you Submitted on 26-5-2023 at 15:49
Reply Report abuse
We’re going away for 4 weeks soon , I’ve set the Thermos on Auto to come on twice a day for an hour to prevent any freezing in the pipes- will the thermos still come on automatically between the set times if the temp drops below a certain level? In other words, will our heating be on full time when we’re away during a cold snap? Obviously this is going to incur high charges for us .Any advice appreciated Submitted on 12-12-2022 at 06:43
Reply Report abuse
Hi I have a CM721 and CM727 Honeywell Thermostat.
I cannot manage to keep the temperature to remain constant, IE At night I sometimes need 23 C to stay warm during the night ( otherwise I get cramp! )
Which button/s do I press and in which sequence please ?
Many Thanks,

Alan
Submitted on 15-11-2021 at 12:31
Reply Report abuse
- You’d have to leave the thermostat on manual and adjust the temperature with the up and down arrow buttons to the right hand side of the screen Answered on 15-11-2021 at 12:33
  Vote up Report abuse
Why does the heating come on outside of the times I have set it to come on, when in auto mode? Submitted on 3-11-2021 at 08:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Honeywell CM727 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM727 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM727

Honeywell CM727 User Manual - English - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info