471573

Honeywell CM727 Manual

9
Zoom out
Zoom in
Previous page
1/16
Next page
9
SETTING-UP THE CM727 ‘Getting Started’
This section shows you how to setup and run the thermostat in 3 simple steps:
STEP 1: Installing the Batteries
Note: Please follow the instructions in this section only if the thermostat screen is blank (no
symbols or digits are displayed). If the room temperature is already displayed move on to Step 2:
Setting the Date and Time.
To install the Batteries:
a.
Lift up the front cover of the thermostat to reveal the battery cover and product controls.
b. Remove the battery cover by pressing down and sliding out.
c. Insert the 2 x AA LR6 Alkaline Batteries supplied with the thermostat, ensuring the correct
orientation (see ‘Controls Layout’ on page 8).
d.
After a short pause the thermostat will display information on the screen and is now ready for use.
e. Replace the battery cover by sliding it firmly back into the front of the thermostat.
STEP 2: Setting the Date and Time
To set the Date and Time:
a. Pressthe DATE/DAY buttonto beginsetting thedate.When
you set the date for the first time after the batteries are inserted,
the display will show:
Press the or buttons to set the current day of the month
(e.g. d 01 = 1
st
day of the month) then press the green
button to confirm.
b.
Press the or buttons to set the current month of the
year (e.g. m 01 = January) then press the green button to
confirm.
c.
Press the or buttons to set the current year (e.g. yr 06
= 2006) then press the green button to confirm.
The date is now stored and the Day Indicator will be displayed
under the current day of the week (e.g. 1 = Monday, 2 =
Tuesday, etc.)
d.
Use the or buttons to set the correct time then press
the green button to confirm. Each press of the buttons will
change the time by one minute and holding them down will
change the time slowly at first and get progressively quicker.
Note: If this mode is entered accidentally then press the
AUTO, MAN or OFF buttons to exit.
STEP 3: Running the Built-in Heating Program
Thethermostatisnowreadyforoperation.PresstheAUTO buttonandthebuilt-inheatingprogram
willstartrunning.Note: The built-in heating program has been designed to provide normal comfort
requirements, but if you want to customise the settings please see the next section ‘Programming
the CM727’.
AM
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-cm727

Reset search

  • My heating is not coming on when I set it to the manual button Submitted on 26-5-2023 at 15:50

    Reply Report abuse

    • It may be because the room temperature is already at temp. Try turning the temp up and see if it fires. Answered on 27-5-2023 at 08:53

      Vote up Report abuse

  • When I set my thermostat to manual the heating doesn’t come on, where am I going wrong. Thank you Submitted on 26-5-2023 at 15:49

    Reply Report abuse

  • We’re going away for 4 weeks soon , I’ve set the Thermos on Auto to come on twice a day for an hour to prevent any freezing in the pipes- will the thermos still come on automatically between the set times if the temp drops below a certain level? In other words, will our heating be on full time when we’re away during a cold snap? Obviously this is going to incur high charges for us .Any advice appreciated Submitted on 12-12-2022 at 06:43

    Reply Report abuse

  • Hi I have a CM721 and CM727 Honeywell Thermostat.
    I cannot manage to keep the temperature to remain constant, IE At night I sometimes need 23 C to stay warm during the night ( otherwise I get cramp! )
    Which button/s do I press and in which sequence please ?
    Many Thanks,

    Alan
    Submitted on 15-11-2021 at 12:31

    Reply Report abuse

    • You’d have to leave the thermostat on manual and adjust the temperature with the up and down arrow buttons to the right hand side of the screen Answered on 15-11-2021 at 12:33

      Vote up Report abuse

  • Why does the heating come on outside of the times I have set it to come on, when in auto mode? Submitted on 3-11-2021 at 08:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM727 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM727 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM727

Honeywell CM727 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info