Manual Honeywell CM 921 (page 6 of 18) (English)

460605

Zoom out

Zoom in

1/18

PROGRAMMING THE CM921

b. To adjust the period start time press the or buttons and ‘TIME 1 OK?’ will

be displayed. Holding the button down will change the time quickly.

Note: If you are pressing the or buttons and the display ﬂashes the next

change period, it means the next change will be pushed forward if you continue

to press or buttons).

c. Press the green button to conﬁrm the setting. ‘CHANGES SAVED’ is displayed

for 1.5 seconds then ‘SET TEMP 1’ will be shown.

Note: If the original time setting did not require adjustment press the green

button to move on to step ‘d.’.

d. The temperature setting for period

will now be ﬂashing. To adjust this press the

or buttons and ‘TEMP 1 OK?’ will be displayed.

e. Press the green button to conﬁrm the setting. ‘CHANGES SAVED’ will be

displayed for a moment followed by ‘SET TIME 2’.

f. The next time and temperature period will now be active. Adjust this by repeating

steps b - e above until all 6 periods are set or move the slider switch to the AUTO

position to run the program as set, at any time.

g. After setting period

‘CHANGES SAVED’ will be displayed as before.

i. To exit the programming mode move the slider switch to the desired operating

mode - AUTO, MAN or OFF. Note: To run the adjusted program select the AUTO

mode.

Note: If the unit is left in programming mode for more than 10 minutes without

the slider being moved or any buttons pressed, ‘MOVE THE SLIDER’ will be

displayed. Press a button to ﬁnish programming the thermostat or move the

slider to select the desired operating mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM 921 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell CM 921 Manual

Product: