474023
18
Zoom out
Zoom in
Previous page
1/24
Next page
18
T8624C,D
PROGRAMMING THE THERMOSTAT • OPERATING THE THERMOSTAT
ON
AUTOON
M3763
AUTO
FAN
FAN
SET THE SYSTEM AND FAN
SWITCHES ON THE SUB-
BASE.
Depending on thermostat model,
some of the switch positions shown
may not be available on the ther-
mostat. Note the positions provided
on the subbase, then set the
switch(es) as desired.
First set the fan switch.
FAN ON: The fan runs continuously. Use for improved
air circulation during special occasions or for more effi-
cient electronic air
FAN AUTO: Normal setting
for most homes. The fan goes
on and off with the air condi-
tioner in summer. In winter, the
fan on most
systems starts a few minutes
after the furnace comes on. It
stops a few minutes after the
furnace goes off. The fan starts
and stops with the furnace in
some electric heat systems and
with the compressor in heat
pump systems.
Then set the system switch.
HEAT: The thermostat controls
your heating system.
AUTO (select models only): The thermostat controls
either your heating or cooling system, depending on
room temperature.
COOL: The thermostat controls your cooling system.
AUTOHEAT OFF
COOL
HEAT OFF
COOL
AUTO
HEAT OFFCOOLAUTO
M3762
HEAT OFFCOOLAUTO
OFF: Both the heating and cooling systems are off.
This completes the programming of the thermostat.
If the thermostat is removed from the wall to program, replace it following the procedure on page 5.
Operating the Thermostat
TEMPORARILY CHANGING THE PROGRAM
These features allow the program to be customized for
those times when someone comes home early, or stays
up late, or plans to be out for the evening.
To keep the current temperature through the
next program period:
SKIP
NEXT
PERIOD
Press and release. The name
of the period to be skipped
will flash in the display until
the next regularly scheduled
period starts.
To go back to the temperature of the previ-
ous program period:
CHANGE
TO LAST
PERIOD
Press and release. The dis-
play will show the name of
the previous period and flash
TEMPORARY until the next
regularly scheduled period starts.
Use the WARMER/COOLER keys to set the tempera-
ture.
You have completed programming the cooling tempera-
tures.
Press and release to start the program.
Go to Step 4.
STEP 4
cleaning.
TUE
LEAVE RETURN
PM
M5044
TUE
WAKE TEMPORARY
PM
M5045
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Chronotherm III - T8624C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Chronotherm III - T8624C in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info