474026

Honeywell Chronotherm III - 69-0865 Manual

12
Zoom out
Zoom in
Previous page
1/32
Next page
8 69-0865
9 69-0865
5. Press and hold +CHAUD or +FROID key until the
display shows the desired heating temperature.
6. Repeat steps 1-5 for the remaining periods—SOR-
TIE, RETOUR and CHOUCHER—as desired.
You may cancel the SORTIE, RETOUR or CHOUCHER
program by holding down the period key (SORTIE,
CHOUCHER and RETOUR) until the time and tempera-
ture disappear from the display.
NOTE: If the display flashes while you are holding down
the +CHAUD or +FROID key, you have reached the
setting limit. For the automatic changeover models,
the heating temperature must be at least two degrees
below the cooling temperature. For example, if the
cooling setting is 24° C, the maximum heating setting
is 22° C. To set a higher heating temperature, you
must first raise the cooling setting.
To set the Saturday and Sunday schedules, use the
same procedure as for weekdays.
Program Schedule
Weekdays Start Time Heating Temperature Cooling Temperature
RÉVEIL
SORTIE
RETOUR
CHOUCHER
Saturday
RÉVEIL
SORTIE
RETOUR
CHOUCHER
Sunday
RÉVEIL
SORTIE
RETOUR
CHOUCHER
1 1
1
Heating and cooling temperatures must be at least 2° C apart.
Set Current Day and Time
1. To set the day, press and release RÉGLER JOUR/
HEURE key.
2. Press and hold JOUR key until the current day ap-
pears in the display.
3. To set the time, press and release RÉGLER JOUR/
HEURE key.
4. Press and hold AVANCER or RECULER key until
the current time appears in the display.
5. Press ACTIVER PROGRAMME key.
Heating Program
1. Press and release RÉVEIL key.
, the pre-
programmed time and temperature appear on the display.
2. Press and hold the JOUR key until the current day
appears on the display. If the display reads cool, press
and release MODE CHAUFF. REFROID. key to switch to
heat.
3. Press and hold JOUR key until LU (or the desired
day) is indicated.
4. Press and hold AVANCER or RECULER key until
the display shows the time you want the temperature to
be at the comfort setting.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Chronotherm III - 69-0865 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Chronotherm III - 69-0865 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info