613661
19
Zoom out
Zoom in
Previous page
1/53
Next page
Power up and bind the CS92 Transceiver
On the CS92 Transceiver
1
Remove the CS92 Transceiver cover
2
Remove the battery tab and replace the cover
3
On the CS92 Transceiver press and hold the
button for 5 seconds. The green light should
come on and the red light should flash
4
Press the button again
5
You should receive a SUCCESS message on the
evohome Controller (if not go back and re-bind)
6
Choose the correct hot water valve type for the system
you’re installing and follow the on screen instructions
To control a stored hot water system you first need to bind
the CS92 Transceiver and then bind the Wireless Relay
Box (BDR91) that is controlling the hot water valve.
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
“Settings”
for 3
seconds
2. Press the green tick
3. Select GUIDED
CONFIGURATION
4. Press STORED
HOT WATER
CONFIGURATION
5. Press the green tick
evohome
Controller
HOLD
5 SEC
PRESS
ONCE
3
1 12
PULL TAB
Wireless Cylinder Thermostat (CS92)
16 Step 3: Power up and bind devices
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK

Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK Installation Guide - English, German - 4 pages

Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK Installation Guide - Dutch - 44 pages

Honeywell ATF 300 - Evotouch WALL MOUNTED DOCK Installation Guide - Dutch, French, Italian, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info