Manual Honeywell 17000 (page 5 of 36) (English, French, Spanish)

723808

Zoom out

Zoom in

1/36

The default program setting upon initial start-up is Manual Operation.

• To go from Automatic Operation to Manual Operation press the PROGRAM button

until both PG1 and PG2 disappear.

• To change the speeds in Manual Operation mode press the SPEED button to select

the desired setting.

• The SPEED button will move through HIGH, MED, LOW, and OFF as noted on the

display, and will function independent of programmed settings.

To run one pre-set program cycle in a 24 hour period (PG1).

PG1 Pre-Setting to run Program One

P1-ON 4 PM HIGH SPEED

P1-OFF 8 AM

To activate pre-set PG1, Press the PROGRAM button once. PG1 will be displayed.

Your machine is now programmed to run from 4pm to 8am on HIGH (Fig. 3a, 3b).

Fig. 3a Fig. 3b

NOTE: The air purifier cannot be programmed unless it is plugged into the outlet.

To SET program points:

Press the SET button and hold for 3 seconds to activate time function. The SET button

will move through these programming functions:

Set (current) TIME.

Set PG1 cycle times P1-ON and P1-OFF.

Set PG2 cycle times P1-ON and P1-OFF, and P2-ON and P2-OFF.

Set EXIT mode and Run the clock.

To Customize the PG1 Program Settings to run ONE

ON/OFF Cycle

in a 24 hour period:

NOTE: You are unable to set the OFF time to be the same as the ON time.

• Press the SET button and hold for 3 seconds to activate time function. Move through

programming functions by repeatedly pressing SET button until PG1 and P1-ON

appear. The clock and program speed icons will appear (Fig. 4a).

• Adjust the time using the hours and minutes button (up for hours, down for minutes).

This is the time that the machine will turn ON.

• Adjust the desired speed setting using the SPEED button.

Manual Operation: Model 17005

Pre-set Program Cycle: Model 17005

Customize Program Cycles: Model 17005

17000-17005 OM EFS.qxd 8/19/05 3:38 PM Page 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 17000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell 17000 Manual

Product: