Manual Honeywell 10288 (page 6 of 20) (English)

689197

Zoom out

Zoom in

1/20

5. Loosen all four pre-assembled mounting bracket

screws, then completely remove the two mounting

bracket screws from the round holes of canopy. Set

aside for later use. Detach mounting bracket from

canopy. (Fig. 5).

Fig. 6

Fig. 5

Mounting

Bracket

Screws

Mounting

Bracket

Canopy

6. Secure the mounting bracket to the outlet box using

screws, spring washers, and at washers provided

with the outlet box (not included) (Fig. 6).

Note: It is very important to use proper hardware

when installing the mounting bracket, as it supports

the fan.

Important: If using the angle mount, ensure the

open end of the mounting bracket is installed facing

the higher point of the ceiling.

Mounting Bracket

Screw

Fig. 4

4. Turn off the circuit breakers and wall switch leading

to the fan wire leads.

WARNING

Failure to disconnect the power supply prior to

installation may result in serious injury or death.

! !

MOUNTING BRACKET INSTALLATION

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 10288 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell 10288 Manual

Product: