625278

Honda WMP20X Manual

13
Zoom out
Zoom in
Previous page
1/100
Next page
13
ENGLISH
TRANSPORTING
When transporting the pump, be sure to keep it upright. If the pump is
tilted or overturned, fuel may spill from the tank, which can result in a
fire hazard.
Allow the engine to cool before transporting the pump.
1. Turn the ignition switch
[1] to the OFF position.
2. Turn the fuel valve [2] to
the OFF position.
3. Drain the pump
chamber into a suitable
container by removing
the pump drain plug [3].
4. Dispose of the liquid or
chemical properly and
reinstall the drain plug
[3].
Follow the chemical
manufacturer’s handling
procedures
STORAGE
STORAGE PREPARATION
Proper storage preparation is essential for keeping your pump
trouble-free and looking good. The following steps will help to keep
rust and corrosion from impairing your pump’s function and
appearance, and will make the engine easier to start when you use
the pump again.
Cleaning the Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner or muffler.
• Using a garden hose or pressure washing equipment can force
water into the air cleaner. Water in the air cleaner will soak the
filter and can enter the carburetor or engine, causing damage.
• Water contacting a hot engine can cause damage. If the engine
has been running, allow it to cool for at least half an hour before
washing.
Cleaning the Pump
1. Wash the pump with a garden hose or other low pressure
equipment. Keep water away from controls and all other places
that are difficult to dry, as water may promote rust.
2. After washing, remove as much standing water as possible with a
dry cloth. Fill the pump chamber with water. Start the engine
outdoors and let it run until it reaches normal operating
temperature to evaporate any water remaining on the engine.
Operating the pump dry will damage the pump seal. Be sure the
pump chamber is filled with water before starting the engine.
3. Stop the engine and allow it to cool.
4. If the pump was filled
with a chemical, follow
the chemical
manufacturer’s handling
procedures.
Clean the pump interior
by removing the pump
drain plug [1] and
flushing with fresh water.
After flushing, drain the
water from the pump
chamber. Install the
pump drain plug.
5. After the pump is clean
and dry, touch up any
damaged paint, and coat
other areas that may rust
with a light film of oil.
OFF
OFF
[1]
[2]
[3]
[1]
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda WMP20X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda WMP20X in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info