625278

Honda WMP20X Manual

4
Zoom out
Zoom in
Previous page
1/100
Next page
4
ENGLISH
ASSEMBLY
PARTS LIST
PROCEDURE
1. Install the rubber mounts on the pump using the 8 x 16 mm
flange bolts and 8 mm locking nuts as shown. Tighten the
nuts to:
Torque: 7.8 ~ 9.8 N•m (80 ~ 100 kg-cm).
2. Apply thread tape to the outlet elbow and install it securely in
the pump housing.
3. Apply thread tape to both hose couplings and securely install
one in the suction port and the other in the outlet elbow .
4. Install the strainer adapter into the strainer .
BEFORE OPERATION
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
Read and understand this manual. Know what the controls do and
how to operate them.
Familiarize yourself with the pump and its operation before you begin
using it. Know how to quickly shut off the engine in case of an
emergency.
Be familiar with any safety precautions that are needed to properly
pump the chemicals that are listed on page 6.
IS YOUR PUMP READY TO GO?
For your safety, and to maximize the service life of your equipment, it
is very important to take a few moments before you operate the pump
to check its condition. Be sure to take care of any problem you find, or
have your servicing dealer correct it, before you operate the pump.
Before beginning your pre-operation checks, be sure the pump is on a
level surface and the ignition switch is in the OFF position.
Check the General Condition of the Pump
• Look around and underneath the pump for signs of oil or petrol
leaks.
• Remove any dirt or debris, especially around the engine, muffler,
and recoil starter.
• Look for signs of damage.
• Check that all nuts, bolts, screws, hose connectors, and clamps are
tightened.
• Keep all shields and covers in place while operating the pump.
• Check the general condition of the hoses. Be sure the hoses are in
serviceable condition before connecting them to the pump.
Check The Following Items Before You Start The Engine
• Check the oil level (page 9).
• Check the air cleaner (page 10).
• Check the fuel level (page 12). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
Ref.
No
Description Qty.
1 Rubber mount 4
2 8 x 16 mm Flange bolt 4
3 8 mm Locking nut 4
4 Outlet elbow 1
5 Thread tape 1
6 Hose coupling 2
7 Coupling 2
8 Strainer adapter 1
9 Strainer 1
!
"
$
#
%
'
&
WARNING
Improperly maintaining this pump, or failing to correct a
problem before operation, could cause a malfunction in which
you could be seriously injured.
Always perform a pre-operation inspection before each
operation, and correct any problem.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda WMP20X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda WMP20X in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info