Manual Honda UMK435E (page 4 of 18) (English)

478015

Zoom out

Zoom in

1/18

4 EN

FITTING

GRIPS AND HANDLES

The bike type handle [1] (U type)

or the loop handle [2] (L types)

must be installed on the

transmission tube [3].

CAUTION:

• U types: Position the handle

between the two arrows [4].

Fitting is to be performed using

the tools in the kit supplied with

the appliance.

ATTACHMENT

PROTECTORS

Your brush cutter is supplied with

a guard.

Install the guard on the machine

with the four screws [8] and the

spacer [7] supplied with the Torx

wrench.

UTILIZATION WITH NYLON

LINE CUTTING HEAD

Fit the two sections [10] and [9]

and clamp them into place as

shown in the diagram. Screw the

3 screws and the washers by

using the torx wrench.

UTILIZATION WITH BLADE

Do not fit the lower section [10].

(UMK435E1 UEET)

While using the Honda

circular saw blade [11]

(optional), always replace

the standard protector [10]

and [9] by the special Honda

protector [12], available as

an accessory.

Assembly is the same as for

the standard protector.

ASSEMBLING THE CUTTING

SYSTEM

CAUTION:

• Pay special attention when

fitting the spacer [13]. The

concave side must face the

transmission [15].

NYLON LINE CUTTING HEAD

With the spacer [13] already fitted

on the transmission shaft, screw

on the nylon line cuttinghead. It is

tightened by turning

counterclockwise.

Use the hexagonal wrench [14] to immobilize the transmission so

that the nylon line cutting head is properly tightened.

3 - TOOTH BLADE

Place the grass-cutting disc [16]

between the spacers [13]

and [17] so that the grooves on

the spacers fit perfectly onto the

shaft.

Install the stabilizer [18]. Block

the rotation of the shaft with the

hexagonal wrench [14]. Securely

tighten the locknut [19] in the

counterclockwise direction with

the appropriate wrench.

CIRCULAR SAW BLADE

(OPTIONAL ACCESSORY)

Assemble in the same way as

the 3- tooth blades.

Use of this accessory is

restricted to the UMK435E1

UEET models only, and it must

be fitted together with the

special Honda protector [20].

Install the blade in the

appropriate way. The arrow on

the blade [21] must point in the

same direction as the one on

the protector [20].

FITTING AND

ADJUSTING THE

HARNESS

For operator safety and

comfort, it is important to

adjust the harness straps so

they can be worn comfortably

and so that the machine is

properly balanced in the

working position.

Machines are supplied with a

double harness [22].

Put on the harness and fasten it

with the quick fastener [23].

Adjust the straps with the

buckles [24] so that the machine

hangs at hip height.

[5] Spark plug wrench / Torx wrench [6] Hexagonal wrench

SAFETY

C11

[2]

[3]

[1]

[3]

[4]

[7]

[8]

[10]

[9]

[10]

[9]

[11]

[12]

SAFETY

C11 D3

[14]

[15]

[13]

[5]

[1]

[2]

[3]

[6]

[7]

[14]

[16]

[17]

[18]

[19]

[13]

[7]

[8]

[20]

[19]

[18]

[17]

[21]

[20]

Ø200

[24]

[23]

[22]

[24]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK435E in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK435E

Honda UMK435E User Manual - English, German - 88 pages

Honda UMK435E User Manual - German - 18 pages

Honda UMK435E User Manual - Dutch - 88 pages

Honda UMK435E User Manual - Dutch - 18 pages

Honda UMK435E User Manual - French, Italian, Spanish - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda UMK435E Manual

Product: