478014
33
Zoom out
Zoom in
Previous page
1/58
Next page
33
OPERATION
OPERATING POSITION
Once the machine has been started, attach it to the harness as
already described in the section on preparation.
When handling the machine, take care to avoid striking any objects with the
cutting attachment and keep the cutting attachment away from your body. Do not use the
machine unless it is attached to the harness.
Hold the brush cutter firmly by both grips as shown.
CAUTION:
When using the machine, always allow the engine to idle between operations. If the machine is
allowed to run at maximum speed with no load (no resistance on the cutting attachment) for long
periods, the engine may be seriously damaged.
WITH NYLON LINE TYPE CUTTING HEAD
This attachment is designed to complete the job done with a lawnmower. It is especially handy and
efficient for cutting grass along walls or fences, around trees or posts and on narrow or uneven
surfaces where a lawnmower cannot be used.
Make sure the line cutting blade is properly mounted on the cutting
attachment guard.
Line length adjustment
At maximum rotating speed, gently press the nylon line cutting head on the ground. The line is
automatically extended. Repeat this operation until the optimal length is obtained.
UTILISATION
POSITION DE TRAVAIL
La machine étant démarrée, l’accrocher au harnais comme expliqué
précédemment au chapitre préparation.
Lorsdes manipulationsde la machine,veiller à ne rien heurteravec l’outil
de coupe et conserver l’outil à distance du corps. Ne pas utiliser la machine sans l’accrocher
au harnais.
Maintenir la débroussailleuse fermement par les deux poignées, comme indiqué.
PRÉCAUTION :
Au cours du travail, toujours laisser le moteur revenir au ralenti entre les opérations. De trop longues
périodes d’utilisation à régime maximal sans charge (pas de résistance de la végétation sur l’outil),
peuvent endommager sérieusement le moteur.
AVEC LA TÊTE À FIL DE NYLON
Cet outil est destiné à compléter le travail d’une tondeuse à gazon. Il est particulièrement pratique et
efficace pour couper l’herbe le long des murs ou clôtures, autour des arbres ou piquets et les surfaces
réduites ou inégales qu’une tondeuse ne peut traiter.
Vérifier que la lame coupe fil soit bien fixée sur la protection du système
de coupe.
Mise à longueur du fil
Au régime maximum de rotation, presser légèrement la tête à fil nylon contre le terrain, le fil sort
automatiquement. Répéter l’opération jusqu’à obtention de la longueur optimale.
F
Lire les consignes
de sécurité
SAFETY
Read the safety
instructions
WARNING :
GB
WARNING :
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK431E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK431E in the language / languages: English, German, French as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK431E

Honda UMK431E User Manual - Dutch, Italian, Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info