478014
19
Zoom out
Zoom in
Previous page
1/58
Next page
19
FITTING
GRIPS AND HANDLES
The bike type handle [1] (U type) or the loop handle [2] (L types) must be installed on the transmission
tube [3].
Fitting is to be performed using the tools in the kit supplied with the appliance. This kit comprises:
[4] Spark plug wrench/Torx wrench
[5] Hexagonal wrench
[6] Goggles
COMPLETE GUARD
Your brush cutter is supplied with a guard.
Utilization with nylon line cutting head: Fit the two sections [7] and [10] and clamp them into place as
shown in the diagram.
Utilization with blade: Do not fit the lower section [7].
Install the guard on the machine with the two screws and washers supplied with the Torx wrench.
Use the two holes that are furthest from the transmission head [8].
ASSEMBLING THE CUTTING SYSTEMS
NYLON LINE CUTTING HEAD (Types LE, UE)
With the spacer [9] already fitted on the transmission shaft, screw on the nylon line cutting head. It is
tightened by turning anticlockwise.
Use the hexagonal wrench [5] to immobilize the transmission so that the nylon line cutting head is
properly tightened.
MONTAGE
POIGNÉES ET GUIDON
Le guidon [1] (type U) ou la poignée simple [2] (types L) doivent être installés sur le tube de
transmission [3].
Le montage est à réaliser à l’aide des outils contenus dans la trousse fournie avec l’appareil et dont le
contenu est :
[4] Clé à bougie / Clé à embout torx
[5] Clé hexagonale
[6] Lunette de protection
PROTECTION COMPLETE
Votre débroussailleuse est livrée avec un protecteur.
Utilisation avec tête de coupe à fil nylon : Assembler les deux parties [7] et [10] en les clipsant comme
indiqué sur le dessin.
Utilisation avec lame : ne pas monter la partie basse [7].
Installer le protecteur sur la machine à l’aide des deux vis et rondelles fournies et de la clé Torx.
Utiliser les 2 trous les plus éloignés du boîtier de transmission [8].
ASSEMBLAGE DES SYSTÈMES DE COUPE
TETE A FIL NYLON (Types LE, UE)
Avec l’entretoise [9] déjà montée sur l’arbre de transmission, visser la tête nylon. Le serrage se fait
dans le sens anti-horaire.
Utiliser la clé hexagonale [5] pour bloquer la transmission afin de serrer correctement la tête à fil de
nylon .
A4 B8 C11 D3
SAFETY
A4 B8 C11 D3
F
GB
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK431E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK431E in the language / languages: English, German, French as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK431E

Honda UMK431E User Manual - Dutch, Italian, Spanish - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info