478012
31
Zoom out
Zoom in
Previous page
1/58
Next page
31
STARTING AND STOPPING THE ENGINE
HOT START
The machine is considered to be “hot” if the engine has been running for more than 5 minutes in the
10 minutes before starting up.
The hot start procedure is the same as the cold start procedure except that the choke [1] is not needed.
(The lever must be left in the low position).
NOTE:
Should you have difficulties to re-start a hot engine, follows this procedure:
1. Turn the engine to the OFF position.
2. Make sure that the choke lever is in OPEN position.
3. Keep the throttle control lever (throttle trigger) fully squeezed.
4. Pull the starter grip 3 to 5 times, and release the throttle control lever (throttle trigger).
5. Start the engine referring to the procédures described above.
CAUTION:
Be sure to turn the engine switch to the OFF position.
If this operation is executed with the engine switch at the ON position, the blade may rotate when the
engine starts and a personal injury may result.
STOPPING THE ENGINE
1. To stop the engine, press the Start/Stop button to engage the Stop position (O) [2].
2. This step can also be taken to stop the machine in case of emergency.
Note that the cutting attachment continues turning by inertia after the
engine has been stopped.
MISE EN MARCHE ET ARRÊT DU MOTEUR
DÉMARRAGE A CHAUD
La machine est considérée comme “chaude” si le moteur a tourné plus de cinq minutes dans les dix
minutes qui précèdent la mise en marche.
La procédure de démarrage à chaud est identique à celle du démarrage à froid, sauf qu’il n’est pas
nécessaire d’utiliser le starter [1] (il doit rester en position basse).
NOTE :
En cas de difficultés pour redémarrer le moteur à chaud :
1. Glisser le bouton Marche/Arrêt en position Arrêt (O).
2. Assurez-vous que le starter est en position basse.
3. Maintenir la gâchette des gaz enfoncée.
4. Tirer le lanceur3à5fois et relâcher la gâchette des gaz.
5. Démarrer le moteur selon la procédure décrite ci-dessus.
PRÉCAUTION :
Assurez-vous que le bouton marche arrêt est en position arrêt (O).
Dans le cas contraire, l’outil de coupe se mettrait en marche au démarrage du moteur et pourrait
entraîner des dommages corporels.
ARRÊT DU MOTEUR
1. Pour arrêter le moteur, pousser le bouton Marche / Arrêt sur la position arrêt (O) [2].
2. Cette commande permet également d’arrêter la machine en cas d’urgence.
Noter que l’outil de coupe continue àtourner par inertiemême après l’arrêt
du moteur.
WARNING :
F
GB
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK425E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK425E in the language / languages: English, German, French as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK425E

Honda UMK425E User Manual - English - 88 pages

Honda UMK425E User Manual - English - 18 pages

Honda UMK425E User Manual - German - 88 pages

Honda UMK425E User Manual - German - 18 pages

Honda UMK425E User Manual - Dutch - 88 pages

Honda UMK425E User Manual - Dutch - 18 pages

Honda UMK425E User Manual - French, Italian, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info