478012
4
Zoom out
Zoom in
Previous page
1/18
Next page
4 EN
FITTING
GRIPS AND HANDLES
The bike type handle [1] (U type)
or the loop handle [2] (L types)
must be installed on the
transmission tube [3].
CAUTION:
U types: Position the handle
between the two arrows [4].
Fitting is to be performed using
the tools in the kit supplied with
the appliance.
ATTACHMENT
PROTECTORS
Your brush cutter is supplied with
a guard.
Install the guard on the machine
with the four screws [8] and the
spacer [7] supplied with the Torx
wrench.
UTILIZATION WITH NYLON
LINE CUTTING HEAD
Fit the two sections [10] and [9]
and clamp them into place as
shown in the diagram. Screw the
3 screws and the washers by
using the torx wrench.
UTILIZATION WITH BLADE
Do not fit the lower section [10].
(UMK435E1 UEET)
While using the Honda
circular saw blade [11]
(optional), always replace
the standard protector [10]
and [9] by the special Honda
protector [12], available as
an accessory.
Assembly is the same as for
the standard protector.
ASSEMBLING THE CUTTING
SYSTEM
CAUTION:
Pay special attention when
fitting the spacer [13]. The
concave side must face the
transmission [15].
NYLON LINE CUTTING HEAD
With the spacer [13] already fitted
on the transmission shaft, screw
on the nylon line cuttinghead. It is
tightened by turning
counterclockwise.
Use the hexagonal wrench [14] to immobilize the transmission so
that the nylon line cutting head is properly tightened.
3 - TOOTH BLADE
Place the grass-cutting disc [16]
between the spacers [13]
and [17] so that the grooves on
the spacers fit perfectly onto the
shaft.
Install the stabilizer [18]. Block
the rotation of the shaft with the
hexagonal wrench [14]. Securely
tighten the locknut [19] in the
counterclockwise direction with
the appropriate wrench.
CIRCULAR SAW BLADE
(OPTIONAL ACCESSORY)
Assemble in the same way as
the 3- tooth blades.
Use of this accessory is
restricted to the UMK435E1
UEET models only, and it must
be fitted together with the
special Honda protector [20].
Install the blade in the
appropriate way. The arrow on
the blade [21] must point in the
same direction as the one on
the protector [20].
FITTING AND
ADJUSTING THE
HARNESS
For operator safety and
comfort, it is important to
adjust the harness straps so
they can be worn comfortably
and so that the machine is
properly balanced in the
working position.
Machines are supplied with a
double harness [22].
Put on the harness and fasten it
with the quick fastener [23].
Adjust the straps with the
buckles [24] so that the machine
hangs at hip height.
[5] Spark plug wrench / Torx wrench [6] Hexagonal wrench
B3
SAFETY
C11
D3
A1
A4
[2]
[3]
[1]
[3]
[4]
[7]
[8]
[10]
[9]
[10]
[9]
R
O
T
A
T
I
O
N
[11]
[12]
SAFETY
B8
C11 D3
[14]
[15]
[13]
[5]
[1]
[2]
[3]
[6]
[7]
[14]
[16]
[17]
[18]
[19]
[13]
[7]
[8]
[20]
[19]
[18]
[17]
M
A
X
.
1
0
.
0
0
0
R
P
M
[21]
[20]
Ø200
[24]
[23]
[22]
[24]
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK425E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK425E in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK425E

Honda UMK425E User Manual - English - 88 pages

Honda UMK425E User Manual - English - 58 pages

Honda UMK425E User Manual - German - 88 pages

Honda UMK425E User Manual - German - 58 pages

Honda UMK425E User Manual - German - 18 pages

Honda UMK425E User Manual - Dutch - 88 pages

Honda UMK425E User Manual - Dutch - 18 pages

Honda UMK425E User Manual - French - 88 pages

Honda UMK425E User Manual - French - 58 pages

Honda UMK425E User Manual - Italian, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info