Removal:
1. Make sure the ignition switch is OFF.
2. Remove the seat (page 62).
3. Release the rings and remove the rubber
band (1).
4. Disconnect the negative (-) terminal lead
(2) from the battery first, then disconnect
the positive (+) terminal lead (3).
5. Pull out the battery (4) from the battery
box
Installation:
1. Reinstall in the reverse order of removal.
Be sure to connect the positive (+)
terminal first, then the negative (-)
terminal.
2. Check all bolts and other fasteners are
secure.
(1) Rubber band
(2) Negative (-) terminal lead
(3) Positive (+) terminal lead
(4) Battery