551055

Honda NC 700X 12V. Acc.Socket Manual

2
Zoom out
Zoom in
Previous page
1/7
Next page
© 2012 Honda Motor Co., Ltd. - All Rights Reserved.
2 of 7
87957-MGS-A300
USE AND CARE INFORMATION
Check the accessory mounts frequently and •
retighten if necessary.
Use a 1A fuse for replacement of the fuse in the •
accessory harness. Do not use any other fuse for
replacement.
Use a 7.5A fuse for replacement of the fuse in •
the Relay Set. Do not use any other fuse for
replacement.
The maximum power rating of connected accessories •
is 12 W (12 V, 1 A).
Use accessories with the engine running to avoid •
discharging the battery.
Switch the headlight to low beam when accessories •
are connected to avoid discharging the battery.
Do not use a cigarette lighter, as this can cause a •
malfunction.
Cover the socket with the cap when the accessory •
socket is not used to prevent entry of foreign objects.
Carefully secure any connected devices, as •
vibrations may cause them to shift unexpectedly.
INSTALLATION INFORMATION
CAUTION:
To prevent burns, allow the engine, exhaust system, •
radiator, etc., to cool before installing the accessory.
NOTE:
The following accessories (sold separately) are •
required to install this accessory:
Sub Harness –
Relay Set –
Reinstall the removed parts on the motorcycle and •
make sure that wires and harnesses are not pinched.
Disconnect the negative (-) cable from the battery •
before installing this accessory.
The memory of the clock will be erased when •
you disconnect the battery. Reset the clock after
reconnecting the battery.
Trim the excess ends off the wire ties after attaching •
them to the wire harnesses. Do not allow the cut part
of the wire tie to interfere with any harness or brake
hose.
When replacing the Sub Harness or Relay Set, •
follow the instructions described in these installation
instructions.
SCREW
BOLT
MAINTENANCE LID
NEGATIVE CABLE
PREPARING THE RELAY SET
1. Refer to the Service Manual for the motorcycle,
remove the maintenance lid and disconnect the
negative cable from the battery.
FUSE BOX COVER
2. Remove the fuse box cover as shown.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700X 12V. Acc.Socket at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700X 12V. Acc.Socket in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info