552645
743
Zoom out
Zoom in
Previous page
1/773
Next page
22-20
dummyheaddummyhead
LIGHTS/METERS/SWITCHES
EOP SWITCH LINE INSPECTION
Turn the ignition switch OFF.
Disconnect the EOP switch 1P (Gray) connector [1].
Check for continuity between the EOP switch connector
terminal and ground.
If there is continuity, the Light green wire has a short
circuit.
If there is no continuity, replace the ECM/PCM with
a known good one, and recheck.
If the ECM/PCM is replaced, perform the following:
Key Registration Procedure (page 23-6)
Clutch Initialize Learning Procedure (NC700XD/
SD) (page 12-120)
EOP SWITCH REMOVAL/
INSTALLATION
Remove the radiator reserve tank (page 8-14).
Disconnect the EOP switch 1P (Gray) connector [1].
Remove the EOP switch [2] from the crankcase.
Installation is in the reverse order of removal.
Apply sealant to the EOP switch threads.
Route the wires and hoses properly (page 1-25).
Check the engine oil level (page 3-12).
CONNECTION: Light green – Ground
[1]
Lg
TORQUE:18 N·m (1.8 kgf·m, 13 lbf·ft)
[2]
[1]
743


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700 in the language / languages: English as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info