552645
726
Zoom out
Zoom in
Previous page
1/773
Next page
22-3
dummyheaddummyhead
LIGHTS/METERS/SWITCHES
SERVICE INFORMATION
GENERAL
Note the following when replacing the halogen headlight bulb.
Wear clean gloves while replacing the bulb. Do not put fingerprints on the headlight bulb, as they may create hot spots on the
bulb and cause it to fail.
If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
Be sure to install the dust cover after replacing the headlight bulb.
A halogen headlight bulb becomes very hot while the headlight is ON, and remains hot for a while after it is turned OFF. Be sure
to let it cool down before servicing.
Check the battery condition before performing any inspection that requires proper battery voltage.
Use an electric heating element to heat the water/coolant mixture for the ECT sensor inspection. Keep flammable materials
away from the electric heating element. Wear protective clothing, insulated gloves and eye protection.
A continuity test can be made with the switches installed on the motorcycle.
The following color codes are used throughout this section.
SPECIFICATIONS
TORQUE VALUES
Bu = Blue G = Green P = Pink V = Violet Y = Yellow
Bl = Black Gr = Gray R = Red W = White
ITEM SPECIFICATIONS
Bulbs Headlight 12 V – 60/55 W
Position light 12 V – 5 W
Brake/tail/license light 12 V – 21/5 W
Turn signal light 12 V – 21 W x 4
Instrument light LED
Turn signal indicator LED
High beam indicator LED
Neutral indicator LED
Engine oil pressure indicator LED
High coolant temperature indicator LED
MIL LED
HISS indicator LED
ABS indicator (NC700XA/XD/SA/SD) LED
Parking brake indicator (NC700XD/SD) LED
Fuse Main fuse 30 A
PGM-FI fuse 15 A
Sub fuse 15 A x 2, 7.5 A x 4
ABS fuse (NC700XA/XD/SA/SD) 30 A x 2, 7.5 A
DCT fuse (NC700XD/SD) 30 A, 7.5 A
ECT sensor resistance 40°C (104°F) 1.0 – 1.3 k
100°C (212°F) 0.1 – 0.2 k
Fuel level sensor resistance Full 4 – 6
Empty 80 – 83
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Turn signal light mounting screw 4 6 2.5 (0.3, 1.8)
Combination meter mounting
screw
3 5 1.0 (0.1, 0.7)
Combination meter back cover
mounting screw (NC700S/SA/SD)
4 3 0.3 (0.03, 0.2)
EOP switch 1 PT 1/8 18 (1.8, 13) Apply sealant to the threads.
Ignition switch mounting bolt 2 8 25 (2.5, 18) One way bolt; replace with a new
one.
Neutral switch 1 10 12 (1.2, 9)
Parking brake switch screw
(NC700XD/SD)
1 4 1.2 (0.1, 0.9)
726


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700 in the language / languages: English as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info