552645
24
Zoom out
Zoom in
Previous page
1/773
Next page
1-19
dummyheaddummyhead
GENERAL INFORMATION
CRANKCASE/TRANSMISSION/BALANCER
CRANKSHAFT/PISTON/CYLINDER
ENGINE REMOVAL/INSTALLATION
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Mainshaft bearing set plate bolt 3 6 12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Shift drum bearing set plate bolt 2 6 12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Balancer shaft bearing set plate
bolt
3 6 12 (1.2, 9) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) except 2.0 ± 1.0 mm (0.08 ±
0.04 in) from tip
Crankcase main journal bolt (new) 6 9 20 (2.0, 15) + 150° See page 14-30
Replace with a new one.
Crankcase 10 mm bolt 1 10 39 (4.0, 29)
Crankcase 8 mm bolt 3 8 24 (2.4, 18)
Crankcase 8 x 45 mm bolt 1 8 24 (2.4, 18) Apply locking agent to the threads.
Coating width; 6.5 ± 1.0 mm (0.26 ±
0.04 in) from tip
Crankcase 6 mm bolt 8 6 12 (1.2, 9)
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Crankpin bearing cap bolt 4 6 10 (1.0, 7) + 90° See page 15-7
See page 15-12
Replace with a new one.
Apply engine oil to the threads and
seating surface.
Crankcase main journal bolt
(retightening)
6 9 20 (2.0, 15) + 120° See page 15-9
Apply engine oil to the threads and
seating surface.
ITEM Q'TY
THREAD TORQUE
REMARKS
DIA. (mm) N·m (kgf·m, lbf·ft)
Rear lower engine hunger nut 1 12 59 (6.0, 44)
Front lower engine hunger bolt 2 12 54 (5.5, 40)
Upper engine hunger bolt 2 12 54 (5.5, 40)
Rear upper engine hunger nut 1 12 54 (5.5, 40)
Step holder mounting socket bolt 4 8 32 (3.3, 24)
Drive sprocket bolt 1 10 54 (5.5, 40)
Starter motor terminal nut 1 6 10 (1.0, 7)
Water hose band screw 2 See page 16-18
See page 16-19
See page 16-24
See page 16-25
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700 in the language / languages: English as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info