720162

Honda Miimo HRM40 Manual

11
Zoom out
Zoom in
Previous page
1/114
Next page
10 | English
The perimeter wire can be buried up to 5 cm under the
ground (or non-metallic slabs).
To avoid causing damage to the perimeter wire, do not
verticut or rake the area where it is positioned.
When laying out the wire avoid angles of less than 45°.
This can affect the performance.
Display
Symbol Meaning
Back button
Confirm button
If the confirm button is pressed whilst
mowing, the mower will return to the
docking station
Red LED on: mower error
Green LED on: mower is switched on
Green LED off: The mower is inactive and
your four-digit PIN code is required for
activation.
Or the mower is shut off, the On/Off
switch must be turned on and your four
digit PIN code must be entered to activate
the mower.
Note: during a software update, the green
LED and red LED will be on.
Left/right button
Down/up button
Display with dialog screen
1 2 3
Garden number (shown when more than
one garden map in the mower memory)
The display switches into sleep mode, if no input is made
for 10 minutes.
Adding a Further Garden/Lawn Area
(see figure I)
To install an additional lawn area, please follow the
instructions in the Installation Guide.
With separate docking station, separate gardens (see
figure I, right): The mower can be used on up to three
different gardens. For an additional garden, a separate
docking station (see figure A) and the necessary
perimeter wire and pegs are required. If a schedule or
the Easy Timer calendar function is selected it will cut the
grass of the area it is in, within the time slots.
Switch off the mower when transporting it between
different gardens.
Note: software updates have to be carried out on the
mower in every docking station.
To ensure remembering which docking station belongs
to which garden, it is recommended to label the docking
stations with the garden number and description when
storing them for winter.
Without separate docking station: It is possible to connect
the lawn areas by placing the perimeter wire between the
two lawn areas parallel to each other as close as possible
(see figure I, top left). The additional lawn area without
docking station is not recorded in the map memory and
the mower will not use the Map & Mow cutting strategy in
this lawn area without the docking station. The maximum
recommended lawn area without a docking station is 40
m
2
. The mower will mow until it runs out of battery and will
need to be carried back to the docking station for charging.
Mowing
f Do not let children ride the mower.
f Press the stop button on top of the mower before
lifting. Always lift the mower by its handle. (see
figure F).
Make sure the cutting area is free of small animals such
as hedgehogs or tortoises.
After successful installation you can either immediately
be-gin to mow by confirming "Mow now" on the
display, or wait for the next scheduled cutting period,
as programmed by the Easy Timer Calendar Function
(previous setting required).
A mowing schedule can also be set up according to your
needs.
The mower must mow a lawn area 3 times completely
(do 3 full cuts) to learn the lawn area. During the learning
phase, the visual result may not be optimal.
Approximate runtimes for complete garden coverage
using Map & Mow are listed below. Please note that the
run times will vary depending on the lawn complexity and
number of objects within the garden.
100 m
2
4 h
350 m
2
12 h
400 m
2
14 h
Set a schedule with frequent repetitions. For best mowing
results, set up a frequent mowing schedule for longer
lasting battery and for preventing debris on the lawn.
When the mower is mowing
In "manual" mode, the mower works until the lawn is
mowed. Mowing is interrupted only for charging the
battery. When the lawn area is mowed, the mower
returns to the docking station.
In the programmable "Schedule" mode or with the
Easy Timer calendar function, the mower operates
continuously for a set period of time. Mowing is
interrupted only for charging the battery. If the lawn area
is mowed before the end of a time slot, the mower returns
to the docking station.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM40 in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info