720162

Honda Miimo HRM40 Manual

10
Zoom out
Zoom in
Previous page
1/114
Next page
English | 9
Robotic Lawnmower Unit Miimo HRM40
Docking station
Input voltage VDC 24
Power consumption charging/perimeter wire switched on W 55/2.6
Charging current (up to) A 2.3
Allowable charging temperature range
B)
°C 5–45
Weight according to EPTA-Procedure 01:2014 kg 1.65
Protection type IPX4
Power supply unit
Switzerland 80016-Y0E-003X
United Kingdom 80015-Y0E-003X
Rest of Europe 80014-Y0E-003X
Input voltage (AC) V 220–240
Protection class / II
Frequency Hz 50–60
Output voltage (DC) V 24
Protection type IPX7
Weight kg 0.8
A) Depends on cutting height, grass conditions and moisture
B) Internal battery temperature
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 50636-2-107.
Typically the A-weighted noise levels of the product are:
Sound power level 61 dB(A). Uncertainty K = 2 dB.
Explanation of Figures
Action Figure Page
Accessories
A 22
Delivery scope/unpacking the
mower
B 23
Laying out perimeter wire
C 23
Extending perimeter wire
D 24
Laying perimeter wire around new
inner object
E 24
Lifting up and carrying the mower
F 25
Setting the height of cut
G 25
Place & Mow
H 26
Adding a further lawn area
I 26
– with additional docking station
(right)
– without additional docking station
(top left)
Cleaning
J 27
Maintenance
K 27
Installation
Check if the perimeter wire is fully pegged
to the ground avoiding any slack lengths of
wire. Any loose wire can be a trip hazard.
Remove straw, stones, loose pieces of wood, wire, live
mains cables and other foreign objects from the cutting
area. Make sure that the cutting area is even and has no
ditches, grooves and steep slopes above 15°/27 % that
are clear obstructions for the mower.
The docking station must be positioned on the wire at an
outer edge of the cutting area. It may not be positioned
on the side of a tool or garden shed standing as an island
within the lawn to be mowed.
It is recommended that you mow your lawn once with a
conventional lawnmower before installing and before the
first mowing of the new season and whenever the grass
clippings would be longer than 5 mm.
The mower’s cutting system is designed to cut small
lengths of grass (30–50 mm). The clippings can remain as
mulch to fertilize the lawn. The height of cut for mower
can be adjusted to 30, 40 and 50 mm.
For the first few weeks of usage, set the height of
cut to 50 mm to prevent the perimeter wire being cut.
Afterwards, the wire will be covered by the lawn.
Additional perimeter wire can be added using a wire
connector (see figures D–E).
The perimeter wire can be extended up to a maximum
length of 250 m.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM40 in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info