720160
11
Zoom out
Zoom in
Previous page
1/108
Next page
10 | English
Additional perimeter wire can be added using a wire
connector (see figures DE).
The perimeter wire can be extended up to a maximum
length of 250 m.
The perimeter wire can be buried up to 5 cm under the
ground (or under non-metallic slabs).
To avoid causing damage to the perimeter wire, do not
verticut or rake the area where it is positioned.
When laying out the wire avoid angles of less than 45°.
This can affect the performance.
Display
Symbol Meaning
Back button
Confirm button
If the confirm button is pressed whilst
mowing, the mower will return to the
docking station
Red LED on: mower error
Green LED on: mower is switched on
Green LED off: The mower is inactive and
your four-digit PIN code is required for
activation.
Or the mower is shut off, the On/Off
switch must be turned on and your four
digit PIN code must be entered to activate
the mower.
Note: during a software update, the green
LED and red LED will be on.
Left/right button
Down/up button
Display with dialog screen
1 2 3
Garden number (shown when more than
one garden map in the mower memory)
Network signal present
Network signal absent
The display switches into sleep mode, if no input is made for
10 minutes.
Adding a further Garden/LawnArea
(see figure I)
To install the Miimo to an additional lawn area, please
follow the instructions in the Installation Guide.
Separate lawn area with separate docking station (see
figure I, right): The mower can be used on up to three
different lawns. For an additional lawn area, a separate
docking station (see figure A) and the necessary perimeter
wire and pegs are required. If a schedule or the Honda
“Smart Timer” calendar function is selected, it will cut the
grass of the area it is in, within the time slots.
Switch off the mower when transporting it between the
individual lawn areas.
Note: software updates have to be carried out on the
mower in every docking station.
To ensure remembering which docking station belongs
to which garden, it is recommended to label the docking
stations with the garden number and description when
storing them for winter.
Without separate docking station: It is possible to
connect the lawn areas by placing the perimeter wire
between the two lawn areas parallel to each other as
close as possible (see figure I, top left). The additional
lawn area without docking station is not recorded in the
map memory and the mower will not use the Map & Mow
cutting strategy in this lawn area without the docking
station. The maximum recommended lawn area without
a docking station is 40 m
2
. The mower will mow until it
runs out of battery and will need to be carried back to the
docking station for charging.
Mowing
f Do not let children ride the mower.
f Press the stop button on top of the mower before
lifting. Always lift the mower by its handle. (see
figure F)
Make sure the cutting area is free of small animals such
as hedgehogs or tortoises.
After successful installation, you can begin mowing
immediately by pressing “mow“ on the free Honda
Mii-monitor App. You could also set up a programmed
schedule, using the Honda “Smart Timer” functionality,
which can also plan future cutting sessions based on
when it is forecasted to rain.
A manual “calendar” can also be set up according to
your specific needs.
The mower must mow a lawn area 3 times completely
(do 3 full cuts) to learn the lawn area. During the learning
phase, the visual result may not be optimal.
Approximate runtimes for complete garden coverage
using Map & Mow are listed below. Please note that the
runtimes will vary depending on the lawn complexity and
number of objects within the garden.
100 m
2
4 h
350 m
2
12 h
400 m
2
14 h
Set a schedule with frequent repetitions. This achieves
good mowing results, the battery charge lasts longer and
you avoid clippings on the lawn.
11


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-miimo-hrm40-live

Reset search

  • Hi There.
    My Honda HRM won't pair with the phone and is no responsive. I'm being asked to press the blue button but nothing seems to happen.
    Thanks Submitted on 7-10-2021 at 17:03

    Reply Report abuse
    • Have you turned it on using the black rocker switch at the lower left rear of the machine. Is there anything on the display. The mower does not "pair" with the machine it connects to it via an app which you must download separately. Answered on 11-10-2022 at 08:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM40 Live at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM40 Live in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info