Manual Honda Miimo HRM3000 (page 40 of 112) (English)

720161

Zoom out

Zoom in

1/112

Setting the lawnmower operation

Auto mode

You can set up the advanced auto mode settings as follows:

Point 1

Point 2

Point 3

Point 4

Point 5

Setting the value to reach other areas through the

narrow passage

The lawnmower can reach other areas through narrow

passages with the following settings:

- Congure the minimum value (“0”) of Narrow passage

in the Advanced setting. The lawnmower closely follows

the boundary wire. This is effective for 5 or more narrow

pathways in the garden.

- Congure the value of the narrow passage distance from

the docking station. When passing the congured narrow

passage, the lawnmower closely follows the boundary

wire. This is effective for 4 or fewer narrow pathways in the

garden.

L Width settings in [1.Mowing start points] (M page 40)

L [6.Narrow passage] (M page 44)

NOTE:

- [6.Narrow passage] setting is for going toward the starting

point. If you want to congure the setting for returning to

the docking station, you need to set it in the Homing setup.

For details, see “Homing setup” (M page 48).

Setting the overlap

distance on the

boundary wire

Set the distance that the

lawnmower can cross the

boundary wire.

L [3.Wire Overlap]

(M page 41)

NOTE:

- To have the lawnmower

smoothly turn from

the boundary wire, the

recommended value of

the Wire overlap is 20 cm.

Setting the distance to the start point

Until the lawnmower reaches a set starting point

in an area, it will run without mowing.

L Distance settings in [1.Mowing start points]

(M page 40)

- Sets the distance from the docking station to

start cutting.

Setting the starting

direction from the

docking station

Set whether the

lawnmower should

travel clockwise or

anticlockwise along the

boundary wire to reach

a set starting point.

L (Clockwise) or

(Anticlockwise)

in [1.Mowing start

point]

(M page 40)

Setting the angle to turn from the boundary wire

When leaving the boundary wire, set the angle to turn

from the boundary wire.

L Angle settings in [1.Mowing start points] (M page 40)

- Set the angle of departure for when the lawnmower

arrives at the position specied by the angle of

[1.Mowing start point].

Setting the operation ratio of each area

operation

Set an area operation ratio if you want to mow

more frequently from a certain start point.

For example, if you set the ratio for “Point 1” to

30%, the lawnmower will start mowing 3 times

out of 10 from “Point 1” and 7 times out of 10

from other start points.

L Percentage settings in [1.Mowing start points]

(M page 40)

NOTE:

- You can congure 5 start points.

NOTE:

- If you want to operate the lawnmower with [Auto mode], see “Operating the lawnmower in Auto mode.”

(M page 69).

How do I reset the password if I have forgotten it? Submitted on 11-3-2023 at 14:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM3000 in the language / languages: English as an attachment in your email.

The manual is 36,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM3000

Honda Miimo HRM3000 User Manual - German - 108 pages

Honda Miimo HRM3000 User Manual - Dutch - 108 pages

Honda Miimo HRM3000 User Manual - French - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda Miimo HRM3000 Manual

Product: