720161

Honda Miimo HRM3000 Manual

3
Zoom out
Zoom in
Previous page
1/112
Next page
Honda
Robotic
Lawnmower
HRM3000
Owner’s Manual
Original Instructions
Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor and setting of Bluetooth
®
.
EN
Congratulations on your selection of a Honda Robotic Lawnmower. We are condent that you will enjoy the
benet of your Honda Robotic Lawnmower as we take great pride in creating the nest quality lawn care
products.
We want to help you get the best results from your new robotic lawnmower and to operate it safely. This manual
contains all the information on how to do that; please read it carefully.
Your Honda servicing dealer is dedicated to your satisfaction and will be pleased to answer your questions and
concerns.
Honda Motor Co., Ltd. reserves the right to make changes at anytime without notice and without incurring any
obligation.
No part of this publication may be reproduced without written permission.
This manual should be considered a permanent part of the robotic lawnmower and should remain with it if it is
resold.
Pay special attention to statements preceded by the following words;
N WARNING
Indicates a strong possibility of severe personal injury or death if instructions are not followed.
CAUTION:
Indicates a possibility of personal injury or equipment damage if instructions are not followed.
NOTE:
Gives helpful information.
If a problem should arise, or if you have any questions about the robotic lawnmower, consult an authorised
Honda dealer.
Honda robotic lawnmowers are designed to give safe and dependable service if operated according to
instructions.
N WARNING
- Operating a robotic lawnmower requires special attention to ensure the safety of the operator and the
safety of others. Read and understand this Owner’s Manual before operating the robotic lawnmower;
failure to do so could result in personal injury or equipment damage.
Make sure to have your dealer ll in “LAWN DIAGRAM” (M page 100) and “DEALER CHECKSHEET”
(M page 104) with details on the installation it has performed and the settings it has congured.
•
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
• Google Play, the Google Play logo, and Android are trademarks or registered trademarks of Google Inc.
• The Bluetooth
®
word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by
Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
1
22
Periodical Usage
CONTENTS
Setting
Preparation
- Component identication
(M page 10)
- Installation (M page 12)
- Setting up the lawnmower
(M page 17)
Menu Settings
- Setting the work timer
(M page 34)
-
Setting the lawnmower operation
(M page 38)
- Checking the system
(M page 52)
- Viewing history (M page 55)
- Setting the system (M page 58)
Operation
Work (Auto)
According to settings, the
lawnmower works automatically.
Storage
(M page 91)
Maintenance
- Periodic inspection and
maintenance (M page 79)
- Maintenance procedures
(M page 79)
Safety Instructions
- Weekly checks (M page 72)
- Carrying the lawnmower
(M page 73)
Troubleshooting
(M page 74)
Usage
- Checking the mowing area (M page 66)
- Checking the lawnmower (M page 67)
- Turning on / off the power (M page 67)
- Operating the lawnmower in
Auto mode (M page 69)
- Setting the height of the
blades (M page 70)
Mii-monitor
Preparation
(M page 62)
33
1 OVERVIEW ................................................................................................................4
How the Honda Robotic Lawnmower works
........4
2 SAFETY INSTRUCTIONS .........................................................................................6
Precautions .................................................6
Observe the following points for your safety
........... 7
Label locations ............................................9
3 PREPARATION .......................................................................................................10
Component identication ...........................10 Installation................................................... 12
Setting up the lawnmower .........................17
4 MENU SETTINGS ....................................................................................................32
Menu overview ..........................................32
Setting the work timer ...............................34
• Work timer ................................................34 • Mowing start points ...........................................35
• Seasonal timer .........................................36 • Quiet timer .........................................................37
Setting the lawnmower operation ..............38
• Auto mode ................................................38 • Manual mode ....................................................45
• Garden layout .......................................... 47 • Homing setup ....................................................48
Checking the system .................................52 • Cutting height ....................................................50
• Check signal ............................................ 52 • Test start points ................................................53
Viewing history ..........................................55
• Operation history .....................................55 • Work history ......................................................56
• Fault history ............................................. 57
Setting the system .....................................58
• Language .................................................58 • Display/Sound ...................................................58
• Date and Time .........................................59 • Security .............................................................60
• Reset .......................................................61 • Help ...................................................................61
5 Mii-monitor Preparation .........................................................................................62
About Mii-monitor ......................................62 Installing Mii-monitor ................................... 62
Pairing a device (connecting
via Bluetooth
®
) ...........................................63
Registering a user....................................... 64
6 USAGE .....................................................................................................................66
Checking the mowing area ........................66 Connecting to a power source .................... 66
Checking the lawnmower ..........................67 Turning on / off the power ........................... 67
Operating the lawnmower in Auto mode ...69 Setting the height of the blades .................. 70
Weekly checks ..........................................72 Carrying the lawnmower ............................. 73
7 TROUBLESHOOTING .............................................................................................74
Before contacting your dealer ...................74 Messages ................................................... 75
Resolving problems ...................................77
8 MAINTENANCE .......................................................................................................79
Periodic inspection and maintenance .......79 Maintenance procedures ............................ 79
9 STORAGE ................................................................................................................91
Winter Storage ..........................................91 Get your lawnmower ready for the new
season ........................................................ 91
10 TECHNICAL INFORMATION .................................................................................92
Specications ............................................92
11 APPENDIX .............................................................................................................93
Operating the lawnmower with the Manual mode
...93 Major Honda Distributor Addresses ............ 96
“EC Declaration of Conformity”
CONTENT OUTLINE ................................97
LCD MENU INDEX ......................................................................................................99
LAWN DIAGRAM ......................................................................................................100
DEALER CHECKSHEET ..........................................................................................104
QUICK GUIDE ...........................................................................................................106
4
How the Honda Robotic Lawnmower works
AC adapter
The AC adapter must be installed in a shaded area
protected from rain.
Docking station
Pegs
1
OVERVIEW
How the Honda Robotic Lawnmower works
The mowing area is determined by the boundary wire that emits a signal; when the
lawnmower detects the boundary it turns and it cuts the grass randomly. When battery
starts running out, it goes back to the docking station.
Power cord
Robotic Lawnmower
Boundary wire
Lay the boundary wire by securing it on the ground
with pegs, or burying it under the ground.
Maximum area: 4000 m²
There are various ways to install the
docking station. For details, see “Checking
conditions for installation” (M page 12).
If you install Mii-monitor, the application
for HRM3000, on a Bluetooth
®
-supported
smartphone, you can congure settings or
remotely operate the lawnmower.
Operate within a distance of about 3 m
from the lawnmower.
5
1 OVERVIEW
How the Honda Robotic Lawnmower works
Leave 5 mm of space or less between parts of the boundary wire.
Make sure that parts of the boundary wire do not overlap or cross.
Leave 30 cm to 50 cm
of space between the
boundary wire and
large objects.
Lay boundary wire
around objects
that you want the
lawnmower to avoid.
Leave 1 m of space between the
boundary wire and dangerous
areas such as ponds or holes.
Leave 30 cm to 50 cm
of space between the
boundary wire and the
mowing area boundary.
Laying boundary wire
The boundary wire location determines the parameters of the mowing area, this area
may consist of multiple sections in which the lawnmower can operate. For mowing start
point setup and detailed information please see “4 MENU SETTINGS” (M page 32).
The work area must conform to the following conditions if it includes sloping areas.
• The lawnmower can operate on slopes of 25° (47%). Do not include slopes in the work area that are more than 25° (47%).
• Lay the boundary wire in locations that have a slope of less than 15° (27%).
• If the location in which you are laying the boundary wire has a slope that is steeper than 15° (27%), do the following.
- Do not lay the boundary wire laterally across a slope that is steeper than 15° (27%).
- Lay the boundary wire laterally across a relatively at space, with a slope of less than 15° (27%), that comes after the
location where the slope is more than 15° (27%). (Refer to the diagram below.)
* Laying the boundary wire where the slope is too steep has a bad effect on the lawnmower. This is because the lawnmower
follows along where the boundary wire has been laid.
More than
15° (27%)
Less than
15° (27%)
Incorrect Correct
NOTE:
- Make sure to ll in “LAWN DIAGRAM” referring to the layout of boundary wire (M page 100).
Lay boundary wire around objects
which the lawnmower might run on
top of (e.g. rocks, tree roots, etc.);
these objects must be removed
from the work area.
6
Precautions
2
SAFETY INSTRUCTIONS
Precautions
Carefully observe the following precautions.
• Make sure to keep your hands, feet and any other body parts away from the rotating blades.
• Do not touch sharp components such as the blades or blade disc
other than when performing maintenance. If you do, you may be
injured.
• Always press the manual STOP button rst before you physically interact with the lawnmower such
as lifting, turning sideway or upside down. If you do not, you may come in contact with the blades and
become injured.
• Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge or people unfamiliar with this owner’s manual to use the lawnmower. Local regulations
may restrict the age of the operator.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people
or their property.
• Wear long pants and sturdy shoes when nearby or inside the work area while the lawnmower is
operating.
• Before using the robotic lawnmower or entering the work area, persons using a pacemaker or other
medical device should consult a doctor.
• Do not ride on the lawnmower, push the lawnmower, or use it for
anything other than its intended purpose. An accident may occur or
the lawnmower may be damaged.
• Never use the lawnmower in the immediate vicinity of people, especially children or pets.
• Carry out your mowing operation only within the boundary wire area.
• If there is a risk of the lawnmower damaged by contacting a
sprinkler, move the sprinkler while the lawnmower is operating, or
lay boundary wire around the sprinkler to remove it from the work
area.
7
2 SAFETY INSTRUCTIONS
Precautions / Observe the following points for your safety
• If the outside air temperature is lower than 5°C, the lawnmower will be unable to charge. If lower than
0°C, the lawnmower will not charge nor operate.
• If there is a risk of adverse weather such as lightning or a storm, stop operation and disconnect the
power cord.
• Parts of this product may become warm in direct sunlight. Make sure you do not touch these parts if they
become extremely hot or you may burn yourself.
• Do not charge the lawnmower with anything other than the docking station. An accident may occur or the
lawnmower may be damaged.
• If the power supply cord is damaged, immediately unplug it from the outlet and contact your dealer. Also,
do not touch the damaged part of the power supply cord.
• If there are any holes (such as rabbit holes, etc.) in the work area, ll them in so that the work area is
level. Periodically check the work area for holes.
Observe the following points for your safety
• When carrying the lawnmower, turn it off and carry it as explained in this manual (see page 73) with the
blades facing away from you.
• When carrying the lawnmower, make sure to carry it by the
designated areas (see page 73). If you carry the lawnmower in any
other way, you risk injury from the blades or charging socket of the
lawnmower. You may also drop and damage the lawnmower.
• When using the remote control feature of the lawnmower application
“Mii-monitor”, follow the precautions below.
- Operate in a brightly-lit area
- Avoid operating on wet grass
- Thoroughly watch your footing on inclines
• Always use thick work gloves when performing maintenance. If you
do not, you may be injured by the blades.
• Before operation, always check the work area and remove any
branches, rocks, and other objects that can damage the blades and
cause the lawnmower to stop. If you do not, you may be injured from
objects that are ejected from the bottom of the lawnmower, or the
lawnmower may become damaged.
• Always press the manual STOP button rst before you physically
interact with the lawnmower. If you do not, you may become injured,
prevent the lawnmower from connecting to the docking station, or
stop the lawnmower’s operation.
• When performing maintenance on the lawnmower, make sure
to press the manual STOP button and stop the lawnmower from
moving. If the lawnmower is moving, an accident may occur.
8
Observe the following points for your safety
• Lay the boundary wire so that it is held rmly in place, and perform periodic checks after laying it to
ensure that it has not slackened. If the boundary wire protrudes from the ground, you or someone else
may trip on it and fall.
• Do not touch the exposed tip of a boundary wire that has been cut or damaged. You may be injured or
electrocute yourself.
• If you nd that the boundary wire has been cut, turn off the lawnmower, unplug the AC adapter’s plug
from the power outlet (House), and contact your dealer.
• Install the AC adapter in a place that is out of direct sunlight and does not get wet even in the rain.
• Wear gloves when touching the AC adapter because it becomes hot when it is plugged into a power
outlet (house).
• Naked ame sources, such as candles, must not be placed on the AC adapter.
• The AC adapter and the mains-socket must all times be easily accessible.
• In case of broken cords or plugs the AC adapter must be disposed.
• The AC adapter does not require much attention. If you want to clean it, please use only dry cloths or
brush.
• Use this AC adapter by children shall be under the full supervision of parents.
IP55 is applicable to the adaptor body except plug part. The plug part must be placed beneath the canopy.
When outdoor use, plug part must be inserted into a waterproof socket.
IP degree of Plug:
ETX1HD940EAK ... IP44 for plug part
ETX1HD940BAK ... IP20 for plug part
EXT1HD940WAK ... IP20 for plug part
Note1: The adaptor body also pass the IP68 test.
Protection class ll appliance
non-inherently Short-circuit-proof safety isolating transformer
Switch mode power supply unit
• Do not touch the charging socket. If you touch it, you may become injured.
• Observe the following points when touching the power outlet (House), power cord, and AC adapter. If you
do not, you may be electrocuted.
- Do not touch the power outlet (House), cord, and AC adapter with wet hands.
- Do not touch the power outlet (House), cord, and AC adapter if the power outlet (House), power cord,
or AC adapter is wet.
• Perform periodic checks to conrm that no dust, dirt, or other things have gathered in or on the power outlet
(House), power cord, or AC adapter. If such things are present, remove them or they may cause a re.
• When connecting the plug, hold the plug by its designated grip area. Failure to hold the plug correctly
may result in electrocution if you touch the connector area.
• Make sure that the contents of “SAFETY INSTRUCTIONS” are absolutely clear to persons who may
come in contact with the robotic lawnmower. If you do not, an accident may occur.
• People who are not thoroughly familiar with this Owner’s Manual should not come into contact with the
lawnmower other than to stop it.
• When approaching the operating lawnmower, pay attention to materials that may be scattered by the blades.
• Do not use the lawnmower if the outer casing is damaged.
The blade may accidentally cut you or you may be injured by debris thrown off by the blade.
• Never attempt to tamper with the lawnmower. It can cause an accident as well as damage to the lawnmower.
Disposal
To protect the environment, do not dispose of this product, battery, etc. carelessly by leaving them in
the waste.
Observe the local laws and regulations or consult your authorised Honda dealer for disposal.
9
2 SAFETY INSTRUCTIONS
Label locations
Label locations
POSITIONING OF SAFETY LABELS
Your lawnmower should be used with due care and attention. Therefore, gured labels have been placed
on various parts of the machine to remind you of the main precautions to be taken. Their full meaning
is explained later on. These labels are an integral part of the lawnmower and so, if any of them should
become detached or illegible, contact your servicing dealer for their replacement. You are also asked to
carefully read the safety regulations in the applicable chapter of this handbook.
The Honda Robotic Lawnmower is
designed to give safe and dependable
service if operated according to
instructions.
Read and understand the Owner’s Manual
before operating the Honda Robotic
Lawnmower. Failure to do so could result
in personal injury or equipment damage.
Keep all persons and pets away from the
Honda Robotic Lawnmower area.
Do not touch the rotating blade.
Beware of sharp blades : blade in
movement.
Operate the disabling device before
working on or lifting the machine.
Do not ride on the machine. This machine
is not a toy, keep children away from the
machine.
POSITIONING OF CE MARK, SERIAL
NUMBER, AND OTHER INFORMATION
The manufacturer’s name and address, CE mark, serial number,
and other information are in the following locations indicated in the
illustration.
Manufacturer name
and address
Model type
Serial No.
Year of manufacturing
Cutting width
Rated voltage
Rated power
Mass (Weight)
CE mark
Do not dispose of electric equipment together with household
waste material. If electrical appliances are disposed of in
landlls or dumps, substances can leak and react and enter
into the foodchain, damaging your health and well-being. For
further information on the disposal of this product, please
contact your dealer or your nearest domestic waste collection
service.
Bluetooth
®
Component identification
10
3
PREPARATION
Componentidentication
Body
Docking station
Supplied items
Ruler
Part of the
packaging of this
product is a ruler.
This ruler is used
to check the
position of the
boundary wire
installation.
AC adapter
Install the AC adapter off the ground.
After making all other connections,
connect the AC adapter to the power
outlet (House).
Extension cord
If the power cord of the AC adapter
is not long enough, you can extend
it with the extension cord.
Length: 10 m
Blade Holder
Use the blade holder
when replacing the blades
(M page 87).
Hexagon wrench
Use the hexagon
wrench when
replacing the blades
(M page 87).
Connectors for the
boundary wire
Use connectors to bind the
boundary wire and connect
it to the docking station.
Quantity: 2
Spare Blades
Use spare blades
to replace the
worn ones.
Quantity: 9
Mii-monitor
Download from the App
Store
®
or Google Play
TM
.
You can remotely
operate the lawnmower.
(M page 62)
* Purchase boundary wire and wire pegs at your dealer.
The lawnmower recharges at the docking
station, and returns to the docking station
when mowing is nished or the battery’s
charge becomes low.
You can check the status of the boundary
wire with the LED indicator (M page 67).
The supplied blade holder can be stored in the
docking station.
The storage location is under the station cover.
Manual STOP button
When you press the
manual STOP button,
the control panel cover
pops up.
Bottom view
Charging socket
Front (caster)
wheels (Ï2)
Blade disc
Blades (Ï3)
Carrying area
Rear (drive) wheels (Ï2)
Top view
Control panel
Charging plug
Screw
Quantity: 7
LED indicator
11
3 PREPARATION
Component identification
Selectable menu items and
current setting status.
You can display the
previous screen by
pressing the G button.
15:37 Tue 23/FEB
Work timer
1.Work timer
2.Mowing start points
3.Seasonal timer
4.Quiet timer
ON OFF
Supplied items
Ruler
Part of the
packaging of this
product is a ruler.
This ruler is used
to check the
position of the
boundary wire
installation.
AC adapter
Install the AC adapter off the ground.
After making all other connections,
connect the AC adapter to the power
outlet (House).
Extension cord
If the power cord of the AC adapter
is not long enough, you can extend
it with the extension cord.
Length: 10 m
Blade Holder
Use the blade holder
when replacing the blades
(M page 87).
Hexagon wrench
Use the hexagon
wrench when
replacing the blades
(M page 87).
Connectors for the
boundary wire
Use connectors to bind the
boundary wire and connect
it to the docking station.
Quantity: 2
Spare Blades
Use spare blades
to replace the
worn ones.
Quantity: 9
Mii-monitor
Download from the App
Store
®
or Google Play
TM
.
You can remotely
operate the lawnmower.
(M page 62)
* Purchase boundary wire and wire pegs at your dealer.
Control panel
Home screen
Item selection screen
Mode selection button on which Lawnmower
setting status is displayed as below:
Currently set day and time
Battery status
Icons Description
Auto
Auto mode is set.
Man
Manual mode
is active and no
timer is set.
Home
The lawnmower
will return to the
docking station.
60
Auto
Auto height adjust
60
Manual cutting height
Name of the rst level menu
Display
The home screen and menus
can be seen here while the
lawnmower is turned on.
On button
Press to turn on the power.
Off button
Press to turn off the power.
NOTE:
- The timer does not function
if you turn off the power.
Home button
Press to automatically return the
lawnmower to the docking station after
you close the control panel cover.
Up/down buttons
Press to navigate to the previous/
next item in the display.
Back button
Press to return to the previous
menu in the display.
(The back button cannot be used
in some cases.)
Enter button
Press to enter your selection in the
display.
Number buttons
Press to enter numbers in the display menus.
When there is a number to the left of a display menu
item, you can press the corresponding number button to
highlight that item.
Auto/Manual selection button
Press from the home screen to switch between operation
modes. You can choose from Auto or Manual modes. For
details, see “4 MENU SETTINGS” (M page 32).
Menu button which you select to show the main menu.
Selectable boxes to which you add a check by
pressing the H button.
Cutting height
Displayed when a paired
device is available for
connection.
17:01 Thu 25/FEB
Auto
99%
Menu
60
Installation
12
Installation
We recommend that an authorised Honda dealer performs the installation of your Robotic Lawnmower.
Checking conditions for installation
Check with the dealer that performed the installation if the docking station and boundary wire are installed
according to the conditions below. Also periodically conrm that these conditions are still met.
If any of these conditions are not met, consult your dealer.
It is recommended that the mains power supply is professionally installed in line with local laws and regulations.
Conditions for installing the docking station
Image Condition
5° (8.7%)
5° (8.7%)
5° (8.7%)
5° (8.7%)
• The docking station must be installed on a at
surface with an inclination of no more than 5°
(8.7%).
• The docking station must not be curved.
• The screws must be rmly tightened.
• Before installing the docking station, check the
ground condition which may vary seasonally. It
may be necessary to maintain the ground with
the season.
• If installing the docking station directly on
the lawn, cut the grass on which the docking
station will be located as short as possible.
• Because of a wrong installation of the docking
station, the lawnmower may not be charged.
20 cm or more
1 m or more
Install the docking station in a place where there
are no obstacles in the area indicated with the
slanted line.
Docking direction
Pattern 1 Pattern 2
Pattern 3 Pattern 4
Docking direction
There are four patterns for installing the docking
station.
13
3 PREPARATION
Installation
Image Condition
Example of correct installation
Pattern 1
0 cm or more
within 30 cm
Pattern 1: Standard installation
Connect the docking station perpendicular to
the wire.
Pattern 2 / Pattern 3
5 cm or more
5 cm or more
5 cm or more
30 cm or more
30 cm or more
Pattern 2: Clockwise installation
Connect the docking station parallel to the wire
(in the clockwise direction).
Pattern 3: Counter-clockwise installation
Connect the docking station parallel to the wire
(in the counter-clockwise direction).
Pattern 4
30 cm or more
20 cm or more
Pattern 4: Alcove installation
Connect the docking station in an alcove.
Example of incorrect installation
Example 2Example 1
Obstacle
Example 1
Do not run the boundary wire underneath the
docking station.
Example 2
Do not place obstacles beside the docking
station. Obstacles must be separated from the
wire by a distance of 30 cm or more.
Example of narrow passage installation
Select Pattern 2 or Pattern 3 for the following example.
1 m – 3 m
Select Pattern 4 for the following example.
1 m – 3 m
1 m – 3 m
1 m – 3 m
Narrow passage installation
• A narrow passage is one in which the distance
between wires is 3 m or less.
• Do not make the distance between wires 1 m
or less.
NOTE:
- For narrow passage installations, do not select
docking direction Pattern 1.
Installation
14
Conditions for laying the boundary wire
Image Condition
Height of objects which the
lawnmower might run on top of
Lay boundary wire around objects which the
lawnmower might run on top of (e.g. rocks, tree
roots, etc.); these objects must be removed
from the work area.
Maximum
5 mm
interval
Crossed
The boundary wire entry and exit points for a
round area should be separated by less than
5 mm. (However, the boundary wire should not
cross itself.)
30 cm to 50 cm
There must be 30 cm to 50 cm of space
between the boundary wire and large objects.
(This space can be reduced to as low as 30 cm
if you set [Wire Overlap] to a low value. For
details, consult your dealer.)
Lay fence with
a height of
15 cm or more
Areas which the lawnmower might fall into
Lay fence around areas which the lawnmower
might fall into, such as uneven ground, ponds,
pools, driveways, or other areas with differences
in height.
More than
15° (27%)
Less than
15° (27%)
Do not lay boundary wire so that it intersects on
a slope of more than 15° (27%).
You can lay boundary wire parallel to a slope of
more than 15° (27%) in order to access an area
with a slope of less than 15° (27%).
Boundary wire should be laid so that there is no
excess wire.
Radius
20 m
The lawnmower can detect the signal from the
boundary wire within a 20 m radius.
If the lawnmower enters a space inside the
work area with no boundary wire within a 20 m
radius, the signal will not be detected and the
lawnmower will stop.
Maximum area: 4000 m²
Acute angle
Right angle or
obtuse angle
The boundary wire must not be laid with any
acute angles. (Angles should be more than 90°.)
15
3 PREPARATION
Installation
Image Condition
More than 1 m
More than 3 m
Docking
station
Boundary wire
Boundary wire of
the another robotic
lawnmower
Docking
station
Boundary wire
Boundary wire of
the another robotic
lawnmower
More than 1 m
More than 3 m
If you want to use an additional robotic
lawnmower, the boundary wire must be laid
according to the gure on the left.
1 m or more
Narrow passage (distance between wires)
should be more than 1 m.
Installation
16
Installing boundary wire and connecting to the docking
station
Image Operation
Boundary wire
Set the boundary wire by using the “LAWN
DIAGRAM” (M page 100).
• Leave enough wire to ensure that small
adjustments can be made, double backing
outside of the loop is acceptable.
• Do not x the wire until nish the layout.
• Boundary wire should be laid so that there is
no excess wire.
Peg
Depth: 1
– 20 cm
Fix the boundary wire with pegs to the specied
depth as shown.
Connector
Attach a connector to both ends of the boundary
wire.
1. Put the boundary wire in the grip area of the
connector.
2. Press the connector click with a plier.
3. Cut the position of 1-2 cm from the each
connector.
Connector
Tab
The boundary wire must not be crossed when
connecting to the docking station.
The right hand wire end must be connected to
the right hand pin on the docking station and the
left hand wire end to the left pin.
1. Remove the station cover (M page 66).
2. Pass the boundary wire through the tabs.
3. Insert the connectors into the pins.
4. Install the station cover.
NOTE
- To connect the AC adapter to the docking
station, refer to page 66.
17
3 PREPARATION
Setting up the lawnmower
Setting up the lawnmower
When turning the lawnmower on initially, the initial settings will appear.
Through the initial settings, you can congure the display language, internal date and time, and create your
PIN (Personal Identication Number).
Once initial settings are done, you can congure the settings for the mowing operation of your lawnmower
using the setup wizard.
Setup wizard can be done on the display or using Mii-monitor smartphone/tablet application.
NOTE:
- If your dealer already congured the setup wizard, the setup wizard screen is not displayed.
Turning on the power
After the battery is charged, press the A (On) button to turn on the lawnmower.
The A (On) button is located on the control panel towards the rear side of the lawnmower.
N WARNING
- Donotinsertyourngerbeneaththeclosedcontrolpanelcover.
1
Press the manual STOP button.
The control panel cover pops up.
Manual STOP button
2
Press the A (On) button on the control panel.
The power turns on, and the initial setup screen on the control panel is displayed.
Setting up the lawnmower
18
Initial settings
When turning the lawnmower on initially, the initial settings will appear to set the display language, internal
date and time, and create your PIN (Personal Identication Number).
Initial settings are performed on the control panel. After initial settings, you can use Mii-monitor to change
the settings.
N WARNING
- Make sure to press the manual STOP button before performing the following procedure.
1
Select your preferred language and press the H
button.
Initial setup
Select language
1.English
2.Deutsch
3.Français
4.Italiano
5.Nederlands
6.Svenska
2
Enter the date with the format {Day}/{Month}/{Year}
and the time in 24-hour format.
Initial setup
Set date and time
DD/MM/20YY __:__
(24h)
OK
3
Select [OK] and press the H button.
Initial setup
Crea te a PIN c ode
_ _ _ _
OK
4
Input a PIN using the number buttons.
NOTE:
- Write down your PIN in the space provided. See
“DEALER CHECKSHEET” (M page 104).
5
Select [OK] and press the H button.
The message “Select install menu” is displayed.
You can select the setup method.
[1.Setup wizard] … Step-by-step setup (M page 19)
[2.Advanced setup] ... Set up the Mowing setting/Quiet
timer only (M page 30)
[3.Restart initial setup] ... Redo initial setup
Select install menu
1.Setup wizard
2.Advanced setup
3.Restart initial setup
Finish
Initial setup is completed. Go to the setup wizard to congure the settings for the mowing operation of your
lawnmower.
You can execute the setup wizard not only on the control panel of the lawnmower, but also in Mii-monitor.
If you have not yet installed Mii-monitor, refer to “5 Mii-monitor Preparation” (M page 62).
19
3 PREPARATION
Setting up the lawnmower
Conguringthesettingsthroughthesetupwizard
This section explains the setup wizard procedure using the control panel on the lawnmower.
The setup wizard will guide you to congure the settings for your mowing operation as follows:
Menu name Usage
Conguringandtestingthe
settings
[1. Cutting height] For setting the height of the
lawnmower blades.
- Blade height
[2.Garden layout] For conguring the settings related to
the layout of the boundary wire. These
setting values are referred from the
other settings.
- Direction for the lawnmower to dock to
the docking station
- Length of the boundary wire
- Garden size
- Existence of narrow passages
[3.Mowing start
points]
For conguring the mowing start point
settings to enable the lawnmower to
start mowing from other areas than
from docking station.
- Direction of the mowing start points
- Distance of the start points from the
docking station
- Ratio with which the lawnmower
operates in each area
[4.Test start points] For testing the start points congured
in [3.Mowing start points] menu.
- Testing the setting of each start point
[5.Work timer] For setting the work timer to operate
the lawnmower according to the
schedule.
- Work day and work time
- Seasonal work time
NOTE:
- Before starting the setup wizard, conrm the completion of installing the docking station and laying
boundary wire with your dealer.
- Before starting the setup wizard, ll out the DEALER CHECKSHEET at the end of the Owner’s Manual.
- If the DEALER CHECKSHEET at the end of Owner’s Manual was already lled out by your dealer, refer
to it when conguring the settings through the setup wizard.
- After the settings are nished through the setup wizard, you can modify the setting values in the menu
settings. For details, see “4. MENU SETTINGS” (M page 32).
- You can also modify the setting values in Mii-monitor.
Setting up the lawnmower
20
1. Setting the cutting height
Through this setting, you can set the height of the lawnmower blades.
1-
1
Select[1.Setupwizard]andpresstheH
button.
Setup wizard top screen is displayed.
Select install menu
1.Setup wizard
2.Advanced setup
3.Restart initial setup
Finish
1-
2
Select [1.Cutting height] and press the
H
button.
Cutting height screen is displayed.
Setup wizard 1/5
1.Cutting height
2.G ard en layout
3.Mowing start points
4.Test start points
5.Work timer
1-
3
Select [1. Auto setup] or [2. Manual setup] and
press the
H
button.
Menu name Description
[1.Auto setup] Lawnmower will gradually
reduce the cutting height from
the “start height” to the “target
height” that you prefer.
[2.Manual setup] Cutting height will be xed at
your preferred grass length.
If you select [1. Auto setup], go to step 1-4.
If you select [2.Manual setup], go to step 1-6.
Cutting height 1/5
1.Auto setup
2.Manual setup
1-
4
Set the “Target cutting height” with the
buttons or number buttons and press the
H
button.
Cutting height 1/5
Target height
60(max)
40
20(min)
3 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-miimo-hrm3000

  • How do I reset the password if I have forgotten it? Submitted on 11-3-2023 at 14:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM3000 in the language / languages: English as an attachment in your email.

The manual is 36,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM3000

Honda Miimo HRM3000 User Manual - German - 108 pages

Honda Miimo HRM3000 User Manual - Dutch - 108 pages

Honda Miimo HRM3000 User Manual - French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info