580721
57
Zoom out
Zoom in
Previous page
1/70
Next page
55
7 MAINTENANCE
Blade replacement
Blade replacement
N WARNING
- Put on a pair of work gloves before performing the following procedures.
When you check the blades and nd that the blades must be replaced, follow the steps below to replace
them.
To maintain balance, change all 3 blades and their bolts when you replace the blades.
Part number for replacement blade: 72511-VP7-010
Part number for replacement bolt: 90103-VP7-010
NOTE:
- This work requires technical skill and knowledge, as well as special tools. If you cannot perform the steps
below with the proper tools, consult your dealer.
Removal
1
Check that the power is turned off, and then turn
the lawnmower upside down.
2
Hold the base of the blade disc with a 24 mm
spanner so that the blade disc does not rotate
when you rotate the bolts.
3
Remove the bolt from each blade with a 4 mm
hexagon wrench.
Installation
1
Insert a new bolt through each new blade and
lightly tighten with the hexagon wrench.
2
Tighten the bolts to the specied torque value
using a torque wrench.
3.4~5.0 N m (0.35~0.50 kgf m, 2.5~3.6 lbf ft)
NOTE:
- If you do not have a torque wrench, have your
dealer perform the work.
3
Check that the blades rotate smoothly. If they
do not rotate smoothly, perform removal and
installation of the bolts again.
Hold the blade disc in place
Insert a spanner between the blade
disc holder and the lawnmower
body.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM300 in the language / languages: English as an attachment in your email.

The manual is 14,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM300

Honda Miimo HRM300 User Manual - German - 70 pages

Honda Miimo HRM300 User Manual - Dutch - 70 pages

Honda Miimo HRM300 User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info