610602
32
Zoom out
Zoom in
Previous page
1/86
Next page
30
Setting the lawnmower operation
Setting the lawnmower operation
Auto mode
You can set up the lawnmower operation as follows:
Point 1
Point 2
Point 3
Point 4
Point 5
Setting the value to reach other areas throught the
narrow passage
The lawnmower can reach other areas through narrow
passages with the following settings:
- Congure the minimum value (“0”) of Narrow passage
in the Advanced setting. The lawnmower closely follows
the boundary wire. This is effective for 5 or more narrow
pathways in the garden.
- Congure the value of the narrow passage distance from
the docking station. When passing the congured narrow
passage, the lawnmower closely follows the boundary
wire. This is effective for 4 or fewer narrow pathways in the
garden.
L Width settings in [1.Mowing start points] (M page 32)
L [4.Narrow passage] in [4.Advanced setting] (M page 36)
NOTE:
- [4.Narrow passage] setting is for going toward the starting
point. If you want to congure the setting for returning to
the docking station, you need to set it in the Homing setup.
For details, see “Homing setup” (M page 40).
Setting the overlap
distance on the
boundary wire
Set the distance that the
lawnmower can cross the
boundary wire.
L [1.Wire Overlap] in
[4.Advanced setting]
(M page 33)
NOTE:
- To have the lawnmower
smoothly turn from
the boundary wire, the
recommended value of
the Wire overlap is 20 cm.
Setting the distance to the start point
Until the lawnmower reaches a set starting point
in an area, it will run without mowing.
L Distance settings in [1.Mowing start points]
(M page 32)
- Sets the distance from the docking station to
start cutting.
Setting the starting
direction from the
docking station
Set whether the
lawnmower should
travel clockwise or
anticlockwise along the
boundary wire to reach
a set starting point.
L (Clockwise) or
(Anticlockwise)
in [1.Mowing start
point]
(M page 32)
Setting the angle to turn from the boundary wire
When leaving the boundary wire, set the angle to turn
from the boundary wire.
L Angle settings in [1.Mowing start points] (M page 32)
- Set the angle of departure for when the lawnmower
arrives at the position specied by the angle of
[1.Mowing start point].
Setting the operation ratio of each area
operation
Set an area operation ratio if you want to mow
more frequently from a certain start point.
For example, if you set the ratio for “Point 1” to
30%, the lawnmower will start mowing 3 times
out of 10 from “Point 1” and 7 times out of 10
from other start points.
L Percentage settings in [1.Mowing start points]
(M page 32)
NOTE:
- You can congure the following start points for
each model:
HRM310: 3 start points
HRM520: 5 start points
NOTE:
- If you want to operate the lawnmower with [Auto mode], see “Operating the lawnmower with the Auto mode.”
(M page 54).
VP7Z.indb 30 2014/12/18 14:25:59
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM 520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM 520 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM 520

Honda Miimo HRM 520 User Manual - German - 86 pages

Honda Miimo HRM 520 User Manual - Dutch - 86 pages

Honda Miimo HRM 520 User Manual - French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info