610602
14
Zoom out
Zoom in
Previous page
1/86
Next page
Installation
12
Installation
We strongly recommend that an authorised Honda dealer performs the installation of your Robotic
Lawnmower. Installation by an authorised Honda dealer will ensure that your system is working correctly.
Checking conditions for installation
Check with the dealer that performed the installation if the docking station and boundary wire are installed
according to the conditions below. Also periodically conrm that these conditions are still met.
If any of these conditions are not met, consult your dealer.
It is recommended that the mains power supply is professionally installed in line with local laws and regulations.
Conditions for installing the docking station
Image Condition
5° (8.7%)
5° (8.7%)
5° (8.7%)
5° (8.7%)
The docking station must be installed on a at
surface with an inclination of no more than 5°
(8.7%).
The docking station must not be curved.
The screws must be rmly tightened.
Before installing the docking station, check the
ground condition which may vary seasonally. It
may be necessary to maintain the ground with
the season.
If installing the docking station directly on
the lawn, cut the grass on which the docking
station will be located as short as possible.
Because of a wrong installation of the docking
station, the lawnmower may not be charged.
Type 2
Right side wire connector
(Type 0)
Boundary
wire
length
Docking direction
CW (Clockwise)
ACW (Anti-clockwise)
Left side wire
connector
Right side wire
connector
Left side wire
connector
Right side wire
connector
0-800 m Type 2 Type 0 Type 2 Type 0
You need to set the loop direction CW
(Clockwise) or ACW (Anti-clockwise) when the
lawnmower returns to the docking station.
You also need to connect the connectors of the
boundary wire with the terminals of the docking
station with reference to the left table.
NOTE:
- If your lawnmower is HRM310, the max
length of the boundary wire is 400 m.
More than
1 m
0-20 cmMore than
2 m
More than
1 m
1 m
2 m
Corner
Pattern A Pattern B
The boundary wire must be laid according to
the gure on the left (Pattern A or Pattern B).
There must be no obstacles as follows:
Pattern A: within 1 m from the station
Pattern B: within 2 m from the station
There must not be foreign objects within the
work area near the docking station (in the
shaded area indicated in the image).
The boundary wire under the docking station
must be laid toward the outside of the work
area.
Have your dealer install the short cut wire.
VP7Z.indb 12 2014/12/18 14:25:57
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM 520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM 520 in the language / languages: English as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM 520

Honda Miimo HRM 520 User Manual - German - 86 pages

Honda Miimo HRM 520 User Manual - Dutch - 86 pages

Honda Miimo HRM 520 User Manual - French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info